Best Homestead Food Mart( Valero Fuels)

10903 Homestead, Houston, TX 77016
Grocery / Market
Last inspected: Jan 21, 2026
47
Score
High Risk

The most recent inspection for Best Homestead Food Mart (Valero Fuels) at 10903 Homestead in Houston, TX, on January 21, 2026, resulted in a high-risk score of 47 with 15 minor violations. Notable issues included the condemnation and disposition of contaminated food, improper procedures for food held without temperature control, and time/temperature controlled for safety food not maintained at 41°F in cold storage. Historical data indicates a pattern of high-risk scores across five recorded inspections.

5
Inspections
0
Critical latest
0
Major latest
15
Minor latest
Inspection History
Jan 21, 2026
Reinspection (002)
15 minor violations. 4 corrected on site.
View 15 violations
Condemnation and disposition of contaminated food. tagged food / equipment used/not held pursuant pending disposition.
20-02
General. time without temperature control. except as specified under subitem d of this item, when time without temperature control is used as the public health control for a working supply of time/temperature controlled for safety (tcs) food before cooking, or for ready to eat time/temperature controlled for safety (tcs) food that is displayed or held for service written procedures not prepared in advance, maintained in the food establishment / not made available to the regulatory authority upon request. these written procedures shall specify methods of compliance with subitems b[01]-[03] or c[01]-[05] of this item; and methods of compliance with section 20-21.03(b)(02) of this code for food that is prepared, cooked, and refrigerated before time is used as a public health control.
20-21.02(a)(02)a
Refrigerated storage. cold storage of foods. time/temperature controlled for safety (tcs) food not maintained at 41°f (5°c) in cold storage. (corrected on site)
20-21.03(b)(09)
General. bulk food removed from original container not stored in a container identifying the food by common name. (corrected on site)
20-21.03(a)(06)
Time/temperature controlled for safety (tcs) food. except when time is used as a public health control as specified in section 20-21.02(a)(02) of this code, time/temperature controlled for safety (tcs) food shall be kept at an internal temperature of 41°f (05°c) or below or at a temperature of 135°f (57°c) or above during display and service, except that roasts cooked to a temperature and for a time specified in table 20-21.04-3 of this code or reheated as specified in table 20-21.04-01 of this code may be held for service at a temperature of 130°f (54°c) or above (corrected on site)
20-21.05(a)
General. food employees not using the following cleaning procedures to clean their hands and exposed portions of their arms, including surrogate prosthetic devices for hands and arms. vigorous friction on the surfaces of the lathered fingers, finger tips, areas between the fingers, hands and arms (or by vigorous rubbing the surrogate prosthetic devices for hands and arms) for at least ten-15 seconds, followed by; thorough rinsing under clean, running warm water; followed immediately by thorough drying of cleaned hands and arms (or surrogate prosthetic devices) using a method specified in section 20-21.19(c) of this code. (corrected on site)
20-21.08(a)
Materials; general. multi-use equipment and utensils not designed, constructed and repaired with safe materials, including finishing materials / not corrosion-resistant and nonabsorbent / not smooth, easily cleanable and durable under conditions of normal use.
20-21.10(a)
Cleaning frequency. dry cleaning. surfaces of utensils and equipment contacting food that is not time/temperature controlled for safety (tcs) food not cleaned in equipment such as ice bins, beverage dispensing nozzles, enclosed components of equipment such as ice makers, cooking oil storage tanks and distribution lines, beverage and syrup dispensing lines or tubes, coffee bean grinders, and water vending equipment at a frequency specified by the manufacturer; or absent manufacturer specifications, at a frequency necessary to preclude accumulation of soil or mold. this subsection does not apply when dry cleaning methods are used as specified in subitems a and b of this item.
20-21.11(a)(08)c[04]
Containers. containers stored outside the establishment / dumpsters / compactors / compactor systems / receptacles / waste handling units for refuse / recyclables / and returnables not provided with tight-fitting lids / doors / covers, not kept covered when not in actual use. in containers designed with drains, drain plugs shall be in place at all times, except during cleaning.
20-21.20(a)(03)
Areas / enclosures / receptacles, good repair. storage areas / enclosures / receptacles for refuse / recyclables / returnables not maintained in good repair.
20-21.20(f)
Controlling pests, generally. effective measures intended to eliminate the presence of rodents, flies, cockroaches, and other insects on the premises not utilized.
20-21.21(a)
Floors. floors and floor coverings of all food preparation, food storage, utensil-washing areas, walk-in refrigerating units, dressing rooms, locker rooms, and toilet rooms shall be kept clean.
20-21.22(a)
Construction. walls, including nonsupporting partitions / wall coverings / ceilings, of walk-in refrigerating units / food preparation areas / food storage areas / food display areas / equipment-washing areas / utensil-washing areas not light-colored / smooth / nonabsorbent / easily cleanable except for ceilings over areas used only for beverage preparation and/or service. concrete or pumice blocks used for interior wall construction in these locations shall be finished and sealed to provide an easily cleanable surface except in dry storage areas.
20-21.23(b)
Maintenance. walls / ceilings, including doors, windows, skylights, and similar closures, not kept clean.
20-21.23(a)
Attachments. light fixtures / vent covers / wall-mounted fans / similar equipment not including decorative items attached to walls and ceilings not easily cleanable / not maintained in good repair / not kept clean.
20-21.23(g)
47
Sep 4, 2025
Reinspection (002)
15 minor violations. 5 corrected on site.
View 15 violations
Toilet room. toilet facility / vestibule, not kept clean / not in good repair / not free of objectionable odors.
20-21.18(c)
Refrigerated storage. cold storage of foods. time/temperature controlled for safety (tcs) food not maintained at 41°f (5°c) in cold storage. (corrected on site)
20-21.03(b)(09)
Refrigerated storage. disposition of ready to eat foods. not discarding time/temperature controlled for safety (tcs) , ready to eat food where either temperature or time combination has exceeded. (corrected on site)
20-21.03(b)(11)
General. bulk food removed from original container not stored in a container identifying the food by common name. (corrected on site)
20-21.03(a)(06)
Temperature measuring device, food. no temperature measuring device provided to assure attainment / maintenance of proper internal / holding refrigerated temperature of time/temperature controlled for safety (tcs) food. (corrected on site)
20-21.04(i)
Materials; general. multi-use equipment and utensils not designed, constructed and repaired with safe materials, including finishing materials / not corrosion-resistant and nonabsorbent / not smooth, easily cleanable and durable under conditions of normal use.
20-21.10(a)
Cleaning frequency. nonfood-contact surfaces of equipment not cleaned as often as is necessary to keep the equipment free of accumulation of dust, dirt, food particles, and other debris.
20-21.11(a)(07)
Cleaning frequency. dry cleaning. surfaces of utensils and equipment contacting food that is not time/temperature controlled for safety (tcs) food not cleaned in equipment such as ice bins, beverage dispensing nozzles, enclosed components of equipment such as ice makers, cooking oil storage tanks and distribution lines, beverage and syrup dispensing lines or tubes, coffee bean grinders, and water vending equipment at a frequency specified by the manufacturer; or absent manufacturer specifications, at a frequency necessary to preclude accumulation of soil or mold. this subsection does not apply when dry cleaning methods are used as specified in subitems a and b of this item.
20-21.11(a)(08)c[04]
Single-service articles. single-service and single-use articles not stored at least six inches (15 cm) above the floor on dollies / pallets / racks / skids designed as specified under section 20-21.03(a)2b of this code / not kept in closed cartons that protect them from contamination, except for automatic fire protection sprinkler heads that may be required by law. (corrected on site)
20-21.14(c)(01)
Containers. containers stored outside the establishment / dumpsters / compactors / compactor systems / receptacles / waste handling units for refuse / recyclables / and returnables not provided with tight-fitting lids / doors / covers, not kept covered when not in actual use. in containers designed with drains, drain plugs shall be in place at all times, except during cleaning.
20-21.20(a)(03)
Removing dead or trapped birds / insects / rodents / other pests. dead or trapped birds / insects / rodents / other pests not removed from control devices and the premises at a frequency that prevents the accumulation or attraction of pests and minimizes exposure to decomposing remains.
20-21.21(d)
Maintenance. walls / ceilings, including doors, windows, skylights, and similar closures, not kept clean.
20-21.23(a)
Attachments. light fixtures / vent covers / wall-mounted fans / similar equipment not including decorative items attached to walls and ceilings not easily cleanable / not maintained in good repair / not kept clean.
20-21.23(g)
Sanitation poster not conspicuously posted in area accessible to all employees / not conforming to all requirements.
20-26(c)
Food establishment failed to maintain on premises a certificate of completion of the food handler course for each food employee.
20-53(g)
47
May 18, 2025
Routine Inspection (001)
18 minor violations. 3 corrected on site.
View 18 violations
Special requirements. manufactured food. all food manufactured, processed, or packaged in commercial food processing establishments or commissaries not labeled according to all applicable laws as defined in tfer 228.78 and 228.79. (corrected on site)
20-21.01(b)(06)
General. raw / prepared food removed from original containers / packages being stored in unclean containers / being stored in uncovered containers..
20-21.03(a)(01)
Refrigerated storage. refrigeration facilities. the sensor of a temperature measuring device shall be located to measure the air temperature or a simulated product temperature in the warmest part of the mechanically refrigerated unit and designed to be easily readable.
20-21.03(b)(01)
Materials; general. all equipment and utensils not maintained in good repair.
20-21.10(a)
Cleaning frequency. dry cleaning. surfaces of utensils and equipment contacting food that is not time/temperature controlled for safety (tcs) food not cleaned in equipment such as ice bins, beverage dispensing nozzles, enclosed components of equipment such as ice makers, cooking oil storage tanks and distribution lines, beverage and syrup dispensing lines or tubes, coffee bean grinders, and water vending equipment at a frequency specified by the manufacturer; or absent manufacturer specifications, at a frequency necessary to preclude accumulation of soil or mold. this subsection does not apply when dry cleaning methods are used as specified in subitems a and b of this item.
20-21.11(a)(08)c[04]
Cleaning frequency. nonfood-contact surfaces of equipment not cleaned as often as is necessary to keep the equipment free of accumulation of dust, dirt, food particles, and other debris.
20-21.11(a)(07)
General. plumbing not sized / installed / maintained according to applicable laws.
20-21.17(a)
Backflow. an air gap between the water supply inlet and the flood level rim of the plumbing fixture / equipment / or nonfood equipment not at least twice the diameter of the water supply inlet and may not be less than 25 mm (1 inch). a backflow or backsiphonage prevention device installed on a water supply system shall meet american society of sanitary engineering (asse) standards for construction, installation, maintenance, inspection, and testing for that specific application and type of device. a backflow prevention device shall be located so that it can be serviced and maintained. a hose shall not be attached to a faucet unless a backflow prevention device is installed.
20-21.17(c)
Hand-washing sink supplies. hand-washing sink or group of adjacent hand-washing sinks not provided with individual, disposable towels / a continuous towel system that supplies the user with a clean towel / a hand-drying device providing heated air or a hand-drying device that employs an air-knife system that delivers high velocity, pressurized air at ambient temperatures.
20-21.19(c)
Hand-washing sink installation. hand-washing sink not accessible to employees at all times.
20-21.19(a)
Hand-washing sink maintenance. hand-washing sink / soap dispenser / hand-drying device/ related fixtures not kept clean / not in good repair.
20-21.19(d)
Containers. containers stored outside the establishment / dumpsters / compactors / compactor systems / receptacles / waste handling units for refuse / recyclables / and returnables not provided with tight-fitting lids / doors / covers, not kept covered when not in actual use. in containers designed with drains, drain plugs shall be in place at all times, except during cleaning.
20-21.20(a)(03)
Containers. garbage / recyclables / returnables / refuse not kept in durable / easily cleanable / insect-proof and rodent-proof containers that do not leak and do not absorb liquids. plastic bags and wet-strength paper bags may be used to line the containers, and they may be used for storage inside the food establishment.
20-21.20(a)(01)
Removing dead or trapped birds / insects / rodents / other pests. dead or trapped birds / insects / rodents / other pests not removed from control devices and the premises at a frequency that prevents the accumulation or attraction of pests and minimizes exposure to decomposing remains.
20-21.21(d)
Maintenance. walls / ceilings, including doors, windows, skylights, and similar closures, not maintained in good repair.
20-21.23(a)
Construction. walls, including nonsupporting partitions / wall coverings / ceilings, of walk-in refrigerating units / food preparation areas / food storage areas / food display areas / equipment-washing areas / utensil-washing areas not light-colored / smooth / nonabsorbent / easily cleanable except for ceilings over areas used only for beverage preparation and/or service. concrete or pumice blocks used for interior wall construction in these locations shall be finished and sealed to provide an easily cleanable surface except in dry storage areas.
20-21.23(b)
Sanitation poster not conspicuously posted in area accessible to all employees / not conforming to all requirements. (corrected on site)
20-26(c)
Person in control failed to remove all ashtrays from an area where smoking is prohibited. (corrected on site)
21-244(c)
41
Oct 11, 2024
Routine Inspection (001)
3 minor violations.
View 3 violations
Cleaning frequency. nonfood-contact surfaces of equipment not cleaned as often as is necessary to keep the equipment free of accumulation of dust, dirt, food particles, and other debris.
20-21.11(a)(07)
Containers. containers stored outside the establishment / dumpsters / compactors / compactor systems / receptacles / waste handling units for refuse / recyclables / and returnables not provided with tight-fitting lids / doors / covers, not kept covered when not in actual use. in containers designed with drains, drain plugs shall be in place at all times, except during cleaning.
20-21.20(a)(03)
Signs clearly stating that smoking is prohibited within not conspicuously posted at every entrance to a public place.
21-244(b)
86
Apr 4, 2024
Routine Inspection (001)
6 minor violations. 1 corrected on site.
View 6 violations
Temperature measuring device, food. food temperature measuring devices accurate to ±02°f in the intended range of use not provided / not used to assure attainment and maintenance of proper internal cooking, holding, or refrigeration temperatures of all time/temperature controlled for safety (tcs) food if the thermometers are scaled only in fahrenheit. if the thermometers are scaled in celsius or dually scaled, they shall be accurate to ±01°c in the intended range of use. a temperature measuring device with a suitable small-diameter probe that is designed to measure the temperature of thin masses not provided / not readily accessible to accurately measure the temperature in thin foods, such as meat patties and fish fillets.
20-21.04(i)
Cleaning frequency. nonfood-contact surfaces of equipment not cleaned as often as is necessary to keep the equipment free of accumulation of dust, dirt, food particles, and other debris.
20-21.11(a)(07)
Wiping cloths. moist cloths used for wiping food spills on kitchenware and food-contact surfaces of equipment not clean / not rinsed frequently in one of the sanitizing solutions permitted in section 20-21.12(e)(02) through (06) of this code / used for no other purpose. these cloths shall be stored in the sanitizing solution between uses. (corrected on site)
20-21.11(c)(02)
Using chemicals for sanitization. when using chemicals for sanitization, a test kit or other device that accurately measures the concentration of the solution in parts per million or milligrams per liter not provided and used.
20-21.12(g)
Hand-washing sink supplies. hand-washing sink or group of adjacent hand-washing sinks not provided with individual, disposable towels / a continuous towel system that supplies the user with a clean towel / a hand-drying device providing heated air or a hand-drying device that employs an air-knife system that delivers high velocity, pressurized air at ambient temperatures.
20-21.19(c)
Maintenance. walls / ceilings, including doors, windows, skylights, and similar closures, not kept clean.
20-21.23(a)
74