Brewingz
Last inspected: Sep 19, 2025
90
Score
The health department has logged five inspections at Brewingz, the earliest from 2023. The most recent report on file is from Sep 19, 2025. A low risk rating suggests inspectors haven't found much to be concerned about lately.
Violation counts have been trending down, averaging around two violations across recent inspections versus roughly six violations before.
The pattern that stands out is “plumbing fixture installation”, which has been cited three times.
That falls roughly in the middle of the pack for Houston restaurants. The file should reassure diners considering a visit.
5
Inspections
0
Critical latest
0
Major latest
2
Minor latest
Inspection History
Sep 19, 2025
Complaint (003)
2 minor violations.
View 2 violations
8-304.11(k) the permit holder shall notify customers that a copy of the most recent establishment inspection report is available upon request by posting a sign or placard in a location in the food establishment that is conspicuous to customers or by another method acceptable to the regulatory authority.
20-20(c)
Floors. floors and floor coverings of all food preparation, food storage, utensil-washing areas, walk-in refrigerating units, dressing rooms, locker rooms, and toilet rooms shall be maintained in good repair.
20-21.22(a)
90
Sep 4, 2025
Routine Inspection (001)
4 minor violations.
View 4 violations
Plumbing fixture installation. plumbing fixtures, including compartment type utensil-and-food sinks, hand-washing sinks and mop or utility sinks, not installed to preclude splashes from running down mounting surfaces behind and adjacent to the fixture. acceptable installation methods include a liquid tight seal between fixture and mounting surface, insertion into a precut counter, table or cabinet with a perimeter seal or any other effective method. all materials used shall be safe, smooth, impervious and easily cleanable.
20-21.10(m)
Containers. containers stored outside the establishment / dumpsters / compactors / compactor systems / receptacles / waste handling units for refuse / recyclables / and returnables not provided with tight-fitting lids / doors / covers, not kept covered when not in actual use. in containers designed with drains, drain plugs shall be in place at all times, except during cleaning.
20-21.20(a)(03)
Openings. outside openings not protected against the entrance of insects by filling or closing holes and other gaps along floors / walls / ceilings / tight-fitting, self-closing doors, kept closed / closed windows / screening / properly designed and installed air curtains to control flying insects / other means.
20-21.21(b)
Attachments. light fixtures / vent covers / wall-mounted fans / similar equipment not including decorative items attached to walls and ceilings not easily cleanable / not maintained in good repair / not kept clean.
20-21.23(g)
82
Mar 6, 2025
Routine Inspection (001)
8 minor violations. 3 corrected on site.
View 8 violations
Plumbing fixture installation. plumbing fixtures, including compartment type utensil-and-food sinks, hand-washing sinks and mop or utility sinks, not installed to preclude splashes from running down mounting surfaces behind and adjacent to the fixture. acceptable installation methods include a liquid tight seal between fixture and mounting surface, insertion into a precut counter, table or cabinet with a perimeter seal or any other effective method. all materials used shall be safe, smooth, impervious and easily cleanable.
20-21.10(m)
Cleaning frequency. dry cleaning. surfaces of utensils and equipment contacting food that is not time/temperature controlled for safety (tcs) food not cleaned in equipment such as ice bins, beverage dispensing nozzles, enclosed components of equipment such as ice makers, cooking oil storage tanks and distribution lines, beverage and syrup dispensing lines or tubes, coffee bean grinders, and water vending equipment at a frequency specified by the manufacturer; or absent manufacturer specifications, at a frequency necessary to preclude accumulation of soil or mold. this subsection does not apply when dry cleaning methods are used as specified in subitems a and b of this item.
20-21.11(a)(08)c[04]
Cleaning frequency. nonfood-contact surfaces of equipment not cleaned as often as is necessary to keep the equipment free of accumulation of dust, dirt, food particles, and other debris.
20-21.11(a)(07)
Containers. containers stored outside the establishment / dumpsters / compactors / compactor systems / receptacles / waste handling units for refuse / recyclables / and returnables not provided with tight-fitting lids / doors / covers, not kept covered when not in actual use. in containers designed with drains, drain plugs shall be in place at all times, except during cleaning.
20-21.20(a)(03)
Floors. floors and floor coverings of all food preparation, food storage, utensil-washing areas, walk-in refrigerating units, dressing rooms, locker rooms, and toilet rooms shall be maintained in good repair.
20-21.22(a)
Attachments. light fixtures / vent covers / wall-mounted fans / similar equipment not including decorative items attached to walls and ceilings not easily cleanable / not maintained in good repair / not kept clean.
(corrected on site)
20-21.23(g)
Labeling of materials. working containers used for storing poisonous / toxic materials such as cleaners and sanitizers taken from bulk supplies not clearly / individually identified with the common name of the material.
(corrected on site)
20-21.27(b)
Use of materials, container prohibitions, poisonous or toxic material containers. bactericide / cleaning compound / other compound intended for use on food-contact surfaces used in a way that leaves a toxic residue / used in a way that constitutes a hazard to employees or customers.
(corrected on site)
20-21.27(d)(01)
67
Sep 4, 2024
Routine Inspection (001)
4 minor violations.
View 4 violations
Time/temperature controlled for safety (tcs) food. except when time is used as a public health control as specified in section 20-21.02(a)(02) of this code, time/temperature controlled for safety (tcs) food shall be kept at an internal temperature of 41°f (05°c) or below or at a temperature of 135°f (57°c) or above during display and service, except that roasts cooked to a temperature and for a time specified in table 20-21.04-3 of this code or reheated as specified in table 20-21.04-01 of this code may be held for service at a temperature of 130°f (54°c) or above
20-21.05(a)
Plumbing fixture installation. plumbing fixtures, including compartment type utensil-and-food sinks, hand-washing sinks and mop or utility sinks, not installed to preclude splashes from running down mounting surfaces behind and adjacent to the fixture. acceptable installation methods include a liquid tight seal between fixture and mounting surface, insertion into a precut counter, table or cabinet with a perimeter seal or any other effective method. all materials used shall be safe, smooth, impervious and easily cleanable.
20-21.10(m)
Attachments. light fixtures / vent covers / wall-mounted fans / similar equipment not including decorative items attached to walls and ceilings not easily cleanable / not maintained in good repair / not kept clean.
20-21.23(g)
\"no smoking\" signs or the international \"no smoking\" symbol not clearly and conspicuously posted in a public place where smoking is prohibited
21-244(a)
82
Dec 18, 2023
Reinspection (002)
3 minor violations.
View 3 violations
Insect control devices, design and installation. devices used to trap insects by adherence may not be installed above exposed food / clean equipment / utensils / linens and unwrapped single-service articles.
20-21.21(c)(02)
Attachments. light fixtures / vent covers / wall-mounted fans / similar equipment not including decorative items attached to walls and ceilings not easily cleanable / not maintained in good repair / not kept clean.
20-21.23(g)
Protective shielding. light bulbs not shielded / coated / otherwise shatter-resistant in areas where there is exposed food, clean equipment / utensils / linens / unwrapped single-service or single-use articles, except as specified in subitems a and b of this item shielded / coated / otherwise shatter-resistant bulbs need not be provided in areas used only for storing food and single-service articles in unopened packages if the integrity of the packages cannot be affected by broken glass falling onto them and the packages are capable of being cleaned of debris from broken bulbs before the packages are opened.
20-21.24(b)(01)
86
Frequently Asked Questions
When was Brewingz last inspected?
The most recent health inspection at Brewingz on file is from Sep 19, 2025. The public record contains five inspections in total.
What is the most common violation at Brewingz?
Across the inspection record, “plumbing fixture installation” has been cited three times, more than any other issue at Brewingz.
How does Brewingz compare to other restaurants in Houston?
Brewingz most recently scored 90 out of 100, which is about the same as the Houston average of 88.
Has Brewingz's inspection record improved over time?
Yes. Recent inspections at Brewingz have averaged around two violations per visit, down from roughly six earlier in the record.
What does a low risk rating mean?
A low risk rating at Brewingz means inspectors found minimal or no significant issues at the most recent visit. Most facilities at this tier have a clean recent inspection report.
How often is Brewingz inspected?
Based on the inspection history on file, Brewingz is inspected around three times per year on average.
Nearby Restaurants