Dane Taqueria Y Pupuseria

Applicability of article; compliance; penalty for violation; variances, etc. operating a food service / processing establishment not conforming to requirements of article ii.

Temperature measuring device, food. food temperature measuring devices accurate to ±02°f in the intended range of use not provided / not used to assure attainment and maintenance of proper internal cooking, holding, or refrigeration temperatures of all time/temperature controlled for safety (tcs) food if the thermometers are scaled only in fahrenheit. if the thermometers are scaled in celsius or dually scaled, they shall be accurate to ±01°c in the intended range of use. a temperature measuring device with a suitable small-diameter probe that is designed to measure the temperature of thin masses not provided / not readily accessible to accurately measure the temperature in thin foods, such as meat patties and fish fillets.

Cleaning frequency. nonfood-contact surfaces of equipment not cleaned as often as is necessary to keep the equipment free of accumulation of dust, dirt, food particles, and other debris.

Hand-washing sink installation. hand-washing sink not accessible to employees at all times.

Maintenance. walls / ceilings, including doors, windows, skylights, and similar closures, not kept clean.

Special ventilation. filters not cleaned at sufficient frequency to prevent accumulation.

Servicing of mobile food units by commissaries; servicing records. failure of mobile food unit to return to the commissary for the performance of all servicing operations within the 24-hour period preceding operations.

Food employee failed to successfully complete a food handler training course within 60 days of employment.

Maintenance. walls / ceilings, including doors, windows, skylights, and similar closures, not kept clean.

Special ventilation. filters not cleaned at sufficient frequency to prevent accumulation.

Applicability of article; compliance; penalty for violation; variances, etc. operating a food service / processing establishment not conforming to requirements of article ii.

Hair restraint. while handling food or utensils, food employees not wearing effective hair restraints and clothing that covers body hair to prevent the contamination of food or food-contact surfaces. an effective hair restraint means any cap / hat / hair net made of fabric / cord / plastic / paper that effectively covers and holds hair in place. the use of effective hair restraints also applies to any exposed scalp or facial hair where there is the potential for contamination of food or food-contact surfaces. an effective hair restraint shall also be used in the partial or complete absence of scalp hair to preclude touching of the scalp and returning to food handling without hand-washing. facial hair restraints are not be required when facial hair is well-groomed and trimmed.

Cleaning frequency. nonfood-contact surfaces of equipment not cleaned as often as is necessary to keep the equipment free of accumulation of dust, dirt, food particles, and other debris.

Water under pressure. hot water is less 100°f (38°c). minimum acceptable temperature is 110°f (43°c) except as specified in section 20-21.12(d)(02) and 20-21.19(b) of this code. hot water generation and distribution systems shall be sufficient to meet the peak hot water demand throughout the food establishment.

Openings. outside openings not protected against the entrance of insects by filling or closing holes and other gaps along floors / walls / ceilings / tight-fitting, self-closing doors, kept closed / closed windows / screening / properly designed and installed air curtains to control flying insects / other means.

Servicing of mobile food units by commissaries; servicing records. failure of mobile food unit to return to the commissary for the performance of all servicing operations within the 24-hour period preceding operations.

Food employee failed to successfully complete a food handler training course within 60 days of employment.

Cleaning frequency. nonfood-contact surfaces of equipment not cleaned as often as is necessary to keep the equipment free of accumulation of dust, dirt, food particles, and other debris.

Hand-washing sink installation. hand-washing sink not accessible to employees at all times. (corrected on site)

Special ventilation. filters not cleaned at sufficient frequency to prevent accumulation.