Fiesta Mart #05

5600 Mykawa, Houston, TX 77033
Grocery / Market
Last inspected: May 20, 2025
78
Score
Low Risk

Fiesta Mart #05, located at 5600 Mykawa in Houston, TX, had a low-risk inspection on May 20, 2025, with a score of 78. The inspection identified five minor violations, including issues with plumbing fixture installation, cleaning frequency for nonfood-contact surfaces, and the absence of a covered waste receptacle in the toilet room. This most recent inspection follows a historical pattern of mostly low-risk findings across four scored inspections.

4
Inspections
0
Critical latest
0
Major latest
5
Minor latest
Inspection History
May 20, 2025
Complaint (003)
5 minor violations. 2 corrected on site.
View 5 violations
Plumbing fixture installation. plumbing fixtures, including compartment type utensil-and-food sinks, hand-washing sinks and mop or utility sinks, not installed to preclude splashes from running down mounting surfaces behind and adjacent to the fixture. acceptable installation methods include a liquid tight seal between fixture and mounting surface, insertion into a precut counter, table or cabinet with a perimeter seal or any other effective method. all materials used shall be safe, smooth, impervious and easily cleanable.
20-21.10(m)
Cleaning frequency. nonfood-contact surfaces of equipment not cleaned as often as is necessary to keep the equipment free of accumulation of dust, dirt, food particles, and other debris. (corrected on site)
20-21.11(a)(07)
Toilet fixtures. toilet room not provided with at least one covered waste receptacle. (corrected on site)
20-21.18(d)
Openings. outside openings not protected against the entrance of insects by filling or closing holes and other gaps along floors / walls / ceilings / tight-fitting, self-closing doors, kept closed / closed windows / screening / properly designed and installed air curtains to control flying insects / other means.
20-21.21(b)
Maintenance. walls / ceilings, including doors, windows, skylights, and similar closures, not maintained in good repair.
20-21.23(a)
78
May 15, 2025
Reinspection (002)
4 minor violations.
View 4 violations
Plumbing fixture installation. plumbing fixtures, including compartment type utensil-and-food sinks, hand-washing sinks and mop or utility sinks, not installed to preclude splashes from running down mounting surfaces behind and adjacent to the fixture. acceptable installation methods include a liquid tight seal between fixture and mounting surface, insertion into a precut counter, table or cabinet with a perimeter seal or any other effective method. all materials used shall be safe, smooth, impervious and easily cleanable.
20-21.10(m)
Toilet fixtures. toilet room not provided with at least one covered waste receptacle.
20-21.18(d)
Openings. outside openings not protected against the entrance of insects by filling or closing holes and other gaps along floors / walls / ceilings / tight-fitting, self-closing doors, kept closed / closed windows / screening / properly designed and installed air curtains to control flying insects / other means.
20-21.21(b)
Maintenance. walls / ceilings, including doors, windows, skylights, and similar closures, not maintained in good repair.
20-21.23(a)
82
May 14, 2025
Complaint (003)
16 minor violations. 5 corrected on site.
View 16 violations
Applicability of article; compliance; penalty for violation; variances, etc. operating a food service / processing establishment not conforming to requirements of article ii. (corrected on site)
20-19(b)
General. food not in sound condition / safe for human consumption / free from spoilage, filth, other contaminants. food prepared in or obtained from an unlicensed private home or other unlicensed food establishment is considered to be from an unapproved source and may not be used or offered for sale for human consumption in or from a food establishment. (corrected on site)
20-21.01(a)
Special requirements. shellstock tags. the identity of the source of shellstock that are sold or served not maintained by retaining shellstock tags or labels for 90 calendar days from the date that is recorded on the tag or label, as specified under item (03)b of this subsection by using an approved record keeping system that keeps the tags or labels in chronological order correlated to the date that is recorded on the tag or label, as specified under item (03)b of this subsection.
20-21.01(b)(03)c[01]
General. at all times, including while being stored, prepared, displayed, served, received, or transported, food not protected from potential contamination by all agents, including dust, insects, rodents, toxic materials, cross-contamination, damaged or spoiled products, distressed merchandise, recalled products, unclean equipment and utensils, unnecessary handling, coughs and sneezes, flooding, draining, and overhead leakage or overhead drippage from condensation. (corrected on site)
20-21.02(a)(01)
Refrigerated storage. cold storage of foods. time/temperature controlled for safety (tcs) food not maintained at 41°f (5°c) in cold storage. (corrected on site)
20-21.03(b)(09)
General. using shipping containers / milk / produce crates as storage racks / support shelves.
20-21.03(a)(02)c
Bulk food display, service. the sale of unpackaged food that is displayed and sold in bulk from a self-service container is authorized, provided that the self-service container has a tight-fitting lid that is securely attached to the container and kept closed except during service or refill; the container, lid and any other utensil are constructed of nontoxic materials that provide for easy cleaning and proper repair; a utensil equipped with a handle is provided and used for dispensing of food; and a conspicuous sign instructing the customer on the proper dispensing procedure is posted in the immediate display area.
20-21.05(i)(01)
Materials; general. all equipment and utensils not maintained in good repair. (corrected on site)
20-21.10(a)
Plumbing fixture installation. plumbing fixtures, including compartment type utensil-and-food sinks, hand-washing sinks and mop or utility sinks, not installed to preclude splashes from running down mounting surfaces behind and adjacent to the fixture. acceptable installation methods include a liquid tight seal between fixture and mounting surface, insertion into a precut counter, table or cabinet with a perimeter seal or any other effective method. all materials used shall be safe, smooth, impervious and easily cleanable.
20-21.10(m)
Cleaning frequency. nonfood-contact surfaces of equipment not cleaned as often as is necessary to keep the equipment free of accumulation of dust, dirt, food particles, and other debris.
20-21.11(a)(07)
Toilet fixtures. toilet room not provided with at least one covered waste receptacle.
20-21.18(d)
Toilet room. toilet facility / vestibule, not kept clean / not in good repair / not free of objectionable odors.
20-21.18(c)
Controlling pests, generally. effective measures intended to eliminate the presence of rodents, flies, cockroaches, and other insects on the premises not utilized.
20-21.21(a)
Openings. screens for windows / doors / skylights / transoms / intake and exhaust air ducts / other openings to the outside not tight-fitting and free of breaks. screening materials shall not be less than sixteen mesh to the inch (16 mesh to 25.4 mm).
20-21.21(b)
Floors. floors and floor coverings of all food preparation, food storage, utensil-washing areas, walk-in refrigerating units, dressing rooms, locker rooms, and toilet rooms shall be nonabsorbent.
20-21.22(a)
Maintenance. walls / ceilings, including doors, windows, skylights, and similar closures, not maintained in good repair.
20-21.23(a)
45
Sep 21, 2024
Routine Inspection (001)
3 minor violations. 1 corrected on site.
View 3 violations
Refrigerated storage. date marking of ready to eat foods. refrigerated / ready to eat time/temperature controlled for safety (tcs) food/portion of time/temperature controlled for safety (tcs) food combined with additional ingredients / portions of food not retaining date marking of the earliest prepared / first-prepared ingredient. (corrected on site)
20-21.03(b)(10)b
Temperature measuring device, food. food temperature measuring devices accurate to ±02°f in the intended range of use not provided / not used to assure attainment and maintenance of proper internal cooking, holding, or refrigeration temperatures of all time/temperature controlled for safety (tcs) food if the thermometers are scaled only in fahrenheit. if the thermometers are scaled in celsius or dually scaled, they shall be accurate to ±01°c in the intended range of use. a temperature measuring device with a suitable small-diameter probe that is designed to measure the temperature of thin masses not provided / not readily accessible to accurately measure the temperature in thin foods, such as meat patties and fish fillets.
20-21.04(i)
Materials; general. all equipment and utensils not maintained in good repair.
20-21.10(a)
86