Fiesta Mart #20

Applicability of article; compliance; penalty for violation; variances, etc. permit holder / person in charge of the food establishment / mobile food unit not in compliance in accordance with provisions of article ii concerning food storage / food preparation / food display / training of employees in basic food safety principles including allergy awareness / not ensuring that food and conditional employees are informed of their responsibility to report information regarding health and activities as they relate to diseases that are transmissible through food / not ensuring written procedures and plans are developed by the food establishment are maintained / implemented. (corrected on site)

General. food employees not using the following cleaning procedures to clean their hands and exposed portions of their arms, including surrogate prosthetic devices for hands and arms. vigorous friction on the surfaces of the lathered fingers, finger tips, areas between the fingers, hands and arms (or by vigorous rubbing the surrogate prosthetic devices for hands and arms) for at least ten-15 seconds, followed by; thorough rinsing under clean, running warm water; followed immediately by thorough drying of cleaned hands and arms (or surrogate prosthetic devices) using a method specified in section 20-21.19(c) of this code. (corrected on site)

Applicability of article; compliance; penalty for violation; variances, etc. operating a food service / processing establishment not conforming to requirements of article ii.

Maintenance. walls / ceilings, including doors, windows, skylights, and similar closures, not maintained in good repair.

General. food not obtained from sources that comply with all laws relating to food and food labeling as defined in tfer 228.78 and 228.79.

General. bulk food removed from original container not stored in a container identifying the food by common name.

Plumbing fixture installation. plumbing fixtures, including compartment type utensil-and-food sinks, hand-washing sinks and mop or utility sinks, not installed to preclude splashes from running down mounting surfaces behind and adjacent to the fixture. acceptable installation methods include a liquid tight seal between fixture and mounting surface, insertion into a precut counter, table or cabinet with a perimeter seal or any other effective method. all materials used shall be safe, smooth, impervious and easily cleanable.

Cleaning frequency. nonfood-contact surfaces of equipment not cleaned as often as is necessary to keep the equipment free of accumulation of dust, dirt, food particles, and other debris.

Attachments. light fixtures / vent covers / wall-mounted fans / similar equipment not including decorative items attached to walls and ceilings not easily cleanable / not maintained in good repair / not kept clean.

Maintenance. walls / ceilings, including doors, windows, skylights, and similar closures, not kept clean.

General. food not in sound condition / safe for human consumption / free from spoilage, filth, other contaminants. food prepared in or obtained from an unlicensed private home or other unlicensed food establishment is considered to be from an unapproved source and may not be used or offered for sale for human consumption in or from a food establishment.

General. bulk food removed from original container not stored in a container identifying the food by common name.

Time/temperature controlled for safety (tcs) food. except when time is used as a public health control as specified in section 20-21.02(a)(02) of this code, time/temperature controlled for safety (tcs) food shall be kept at an internal temperature of 41°f (05°c) or below or at a temperature of 135°f (57°c) or above during display and service, except that roasts cooked to a temperature and for a time specified in table 20-21.04-3 of this code or reheated as specified in table 20-21.04-01 of this code may be held for service at a temperature of 130°f (54°c) or above

Materials; general. sponges. sponges used in contact with cleaned and sanitized or in-use food-contact surfaces.

Plumbing fixture installation. plumbing fixtures, including compartment type utensil-and-food sinks, hand-washing sinks and mop or utility sinks, not installed to preclude splashes from running down mounting surfaces behind and adjacent to the fixture. acceptable installation methods include a liquid tight seal between fixture and mounting surface, insertion into a precut counter, table or cabinet with a perimeter seal or any other effective method. all materials used shall be safe, smooth, impervious and easily cleanable.

Cleaning frequency. nonfood-contact surfaces of equipment not cleaned as often as is necessary to keep the equipment free of accumulation of dust, dirt, food particles, and other debris.

Toilet fixtures. toilet room not provided with at least one covered waste receptacle.

Attachments. light fixtures / vent covers / wall-mounted fans / similar equipment not including decorative items attached to walls and ceilings not easily cleanable / not maintained in good repair / not kept clean.

Maintenance. walls / ceilings, including doors, windows, skylights, and similar closures, not maintained in good repair.

General. equipment / utensils not in current use not stored in a clean and sanitary condition.