Flemingo Supermarket
Last inspected: Nov 10, 2025
55
Score
Inspectors have visited Flemingo Supermarket five times, with records going back to 2024. On Nov 10, 2025, the health department conducted the most recent visit. When a facility lands in medium risk territory, it usually means a mixed inspection result.
Inspection results have stayed in a similar range over the last few visits, averaging around 12 violations each.
The pattern that stands out is “plumbing fixture installation”, which has been cited four times.
Flemingo Supermarket's latest score of 55 falls below the Houston average of 87. Taken together, the history looks like that of a busy facility working through the usual inspection cycle.
5
Inspections
0
Critical latest
0
Major latest
12
Minor latest
Inspection History
Nov 10, 2025
Routine Inspection (001)
12 minor violations. 3 corrected on site.
View 12 violations
Applicability of article; compliance; penalty for violation; variances, etc. permit holder / person in charge of the food establishment / mobile food unit not in compliance in accordance with provisions of article ii concerning food storage / food preparation / food display / training of employees in basic food safety principles including allergy awareness / not ensuring that food and conditional employees are informed of their responsibility to report information regarding health and activities as they relate to diseases that are transmissible through food / not ensuring written procedures and plans are developed by the food establishment are maintained / implemented.
(corrected on site)
20-19(d)
Bulk food display, service. the sale of unpackaged food that is displayed and sold in bulk from a self-service container is authorized, provided that the self-service container has a tight-fitting lid that is securely attached to the container and kept closed except during service or refill; the container, lid and any other utensil are constructed of nontoxic materials that provide for easy cleaning and proper repair; a utensil equipped with a handle is provided and used for dispensing of food; and a conspicuous sign instructing the customer on the proper dispensing procedure is posted in the immediate display area.
20-21.05(i)(01)
Time/temperature controlled for safety (tcs) food. except when time is used as a public health control as specified in section 20-21.02(a)(02) of this code, time/temperature controlled for safety (tcs) food shall be kept at an internal temperature of 41°f (05°c) or below or at a temperature of 135°f (57°c) or above during display and service, except that roasts cooked to a temperature and for a time specified in table 20-21.04-3 of this code or reheated as specified in table 20-21.04-01 of this code may be held for service at a temperature of 130°f (54°c) or above
(corrected on site)
20-21.05(a)
General. food employees not using the following cleaning procedures to clean their hands and exposed portions of their arms, including surrogate prosthetic devices for hands and arms. vigorous friction on the surfaces of the lathered fingers, finger tips, areas between the fingers, hands and arms (or by vigorous rubbing the surrogate prosthetic devices for hands and arms) for at least ten-15 seconds, followed by; thorough rinsing under clean, running warm water; followed immediately by thorough drying of cleaned hands and arms (or surrogate prosthetic devices) using a method specified in section 20-21.19(c) of this code.
(corrected on site)
20-21.08(a)
Materials; general. all equipment and utensils not maintained in good repair.
20-21.10(a)
Design and fabrication; general. all equipment and utensils, including plasticware, not designed / not fabricated for durability under conditions of normal use / not resistant to denting, buckling, pitting, chipping, and crazing. cast iron may be used as a food-contact surface only if the surface is heated, such as in grills, griddle tops and skillets.
20-21.10(b)(01)
Plumbing fixture installation. plumbing fixtures, including compartment type utensil-and-food sinks, hand-washing sinks and mop or utility sinks, not installed to preclude splashes from running down mounting surfaces behind and adjacent to the fixture. acceptable installation methods include a liquid tight seal between fixture and mounting surface, insertion into a precut counter, table or cabinet with a perimeter seal or any other effective method. all materials used shall be safe, smooth, impervious and easily cleanable.
20-21.10(m)
Cleaning frequency. dry cleaning. surfaces of utensils and equipment contacting food that is not time/temperature controlled for safety (tcs) food not cleaned in equipment such as ice bins, beverage dispensing nozzles, enclosed components of equipment such as ice makers, cooking oil storage tanks and distribution lines, beverage and syrup dispensing lines or tubes, coffee bean grinders, and water vending equipment at a frequency specified by the manufacturer; or absent manufacturer specifications, at a frequency necessary to preclude accumulation of soil or mold. this subsection does not apply when dry cleaning methods are used as specified in subitems a and b of this item.
20-21.11(a)(08)c[04]
Hand-washing sink supplies. supply of hand-cleansing liquid / powder / bar soap not available at each hand-washing sink or group of two adjacent hand-washing sinks.
20-21.19(c)
Hand-washing sink installation. hand-washing sink not accessible to employees at all times.
20-21.19(a)
Controlling pests, generally. effective measures intended to eliminate the presence of rodents, flies, cockroaches, and other insects on the premises not utilized.
20-21.21(a)
Floors. floors and floor coverings of all food preparation, food storage, utensil-washing areas, walk-in refrigerating units, dressing rooms, locker rooms, and toilet rooms shall be maintained in good repair.
20-21.22(a)
55
Jul 18, 2025
Reinspection (002)
10 minor violations. 1 corrected on site.
View 10 violations
Applicability of article; compliance; penalty for violation; variances, etc. operating a food service / processing establishment not conforming to requirements of article ii.
20-19(b)
Applicability of article; compliance; penalty for violation; variances, etc. permit holder / person in charge of the food establishment / mobile food unit not in compliance in accordance with provisions of article ii concerning food storage / food preparation / food display / training of employees in basic food safety principles including allergy awareness / not ensuring that food and conditional employees are informed of their responsibility to report information regarding health and activities as they relate to diseases that are transmissible through food / not ensuring written procedures and plans are developed by the food establishment are maintained / implemented.
20-19(d)
Refrigerated storage. date marking of ready to eat foods. time/temperature controlled for safety (tcs) / ready to eat food opened / prepared / packaged and held refrigerated for more than 24 hours not clearly marked to indicate “time food is opened / prepared” and “disposition date”.
20-21.03(b)(10)b
Plumbing fixture installation. plumbing fixtures, including compartment type utensil-and-food sinks, hand-washing sinks and mop or utility sinks, not installed to preclude splashes from running down mounting surfaces behind and adjacent to the fixture. acceptable installation methods include a liquid tight seal between fixture and mounting surface, insertion into a precut counter, table or cabinet with a perimeter seal or any other effective method. all materials used shall be safe, smooth, impervious and easily cleanable.
20-21.10(m)
Materials; general. all equipment and utensils not maintained in good repair.
20-21.10(a)
Cleaning frequency. nonfood-contact surfaces of equipment not cleaned as often as is necessary to keep the equipment free of accumulation of dust, dirt, food particles, and other debris.
20-21.11(a)(07)
Manual sanitizing. equipment and utensils not sanitized in the third compartment in a sanitizing solution that is maintained clean according to one of the methods specified in items (01) through (06) of section 20-21.12(e).
(corrected on site)
20-21.12(d)(04)
Hand-washing sink supplies. supply of hand-cleansing liquid / powder / bar soap not available at each hand-washing sink or group of two adjacent hand-washing sinks.
20-21.19(c)
Hand-washing signage. sign / icon / poster that notifies food employees to wash their hands not provided at all hand-washing sinks used by food employees / not clearly visible to food employees.
20-21.19(g)
Controlling pests, generally. effective measures intended to eliminate the presence of rodents, flies, cockroaches, and other insects on the premises not utilized.
20-21.21(a)
61
May 15, 2025
Routine Inspection (001)
14 minor violations. 1 corrected on site.
View 14 violations
8-304.11(k) the permit holder shall notify customers that a copy of the most recent establishment inspection report is available upon request by posting a sign or placard in a location in the food establishment that is conspicuous to customers or by another method acceptable to the regulatory authority.
20-20(c)
Refrigerated storage. date marking of ready to eat foods. time/temperature controlled for safety (tcs) / ready to eat food opened / prepared / packaged and held refrigerated for more than 24 hours not clearly marked to indicate “time food is opened / prepared” and “disposition date”.
(corrected on site)
20-21.03(b)(10)b
Bulk food display, service. the sale of unpackaged food that is displayed and sold in bulk from a self-service container is authorized, provided that the self-service container has a tight-fitting lid that is securely attached to the container and kept closed except during service or refill; the container, lid and any other utensil are constructed of nontoxic materials that provide for easy cleaning and proper repair; a utensil equipped with a handle is provided and used for dispensing of food; and a conspicuous sign instructing the customer on the proper dispensing procedure is posted in the immediate display area.
20-21.05(i)(01)
Plumbing fixture installation. plumbing fixtures, including compartment type utensil-and-food sinks, hand-washing sinks and mop or utility sinks, not installed to preclude splashes from running down mounting surfaces behind and adjacent to the fixture. acceptable installation methods include a liquid tight seal between fixture and mounting surface, insertion into a precut counter, table or cabinet with a perimeter seal or any other effective method. all materials used shall be safe, smooth, impervious and easily cleanable.
20-21.10(m)
Materials; general. all equipment and utensils not maintained in good repair.
20-21.10(a)
Cleaning frequency. nonfood-contact surfaces of equipment not cleaned as often as is necessary to keep the equipment free of accumulation of dust, dirt, food particles, and other debris.
20-21.11(a)(07)
Hand-washing sink supplies. hand-washing sink or group of adjacent hand-washing sinks not provided with individual, disposable towels / a continuous towel system that supplies the user with a clean towel / a hand-drying device providing heated air or a hand-drying device that employs an air-knife system that delivers high velocity, pressurized air at ambient temperatures.
20-21.19(c)
Containers. garbage / recyclables / returnables / refuse not kept in durable / easily cleanable / insect-proof and rodent-proof containers that do not leak and do not absorb liquids. plastic bags and wet-strength paper bags may be used to line the containers, and they may be used for storage inside the food establishment.
20-21.20(a)(01)
Floor junctures. in all new or extensively remodeled establishments utilizing concrete / terrazzo / ceramic tile / similar flooring materials, and where water flush cleaning methods are used, the junctures between walls and floors not coved / not sealed. in all other cases, the juncture between walls and floors shall not present an open seam of more than one-thirty-second of an inch.
20-21.22(f)
Floors. floors and floor coverings of all food preparation, food storage, utensil-washing areas, walk-in refrigerating units, dressing rooms, locker rooms, and toilet rooms shall be constructed of smooth durable materials such as sealed concrete, terrazzo, ceramic tile, vinyl, plastic, or tight wood impregnated with vinyl or plastic.
20-21.22(a)
Attachments. light fixtures / vent covers / wall-mounted fans / similar equipment not including decorative items attached to walls and ceilings not easily cleanable / not maintained in good repair / not kept clean.
20-21.23(g)
Maintenance. walls / ceilings, including doors, windows, skylights, and similar closures, not kept clean.
20-21.23(a)
Special ventilation. cooking equipment not provided with a ventilation hood / not installed in the manner required by all applicable laws. this subsection does not apply to microwave ovens / electric convection ovens of approved types / electric rice cookers / ovens of approved types.
20-21.25(b)(05)
Signs clearly stating that smoking is prohibited within not conspicuously posted at every entrance to a public place.
21-244(b)
50
Aug 9, 2024
Routine Inspection (001)
7 minor violations.
View 7 violations
8-304.11(k) the permit holder shall notify customers that a copy of the most recent establishment inspection report is available upon request by posting a sign or placard in a location in the food establishment that is conspicuous to customers or by another method acceptable to the regulatory authority.
20-20(c)
General. using shipping containers / milk / produce crates as storage racks / support shelves.
20-21.03(a)(02)c
Temperature measuring device, food. no temperature measuring device provided to assure attainment / maintenance of proper internal / holding refrigerated temperature of time/temperature controlled for safety (tcs) food.
20-21.04(i)
Plumbing fixture installation. plumbing fixtures, including compartment type utensil-and-food sinks, hand-washing sinks and mop or utility sinks, not installed to preclude splashes from running down mounting surfaces behind and adjacent to the fixture. acceptable installation methods include a liquid tight seal between fixture and mounting surface, insertion into a precut counter, table or cabinet with a perimeter seal or any other effective method. all materials used shall be safe, smooth, impervious and easily cleanable.
20-21.10(m)
Cleaning frequency. nonfood-contact surfaces of equipment not cleaned as often as is necessary to keep the equipment free of accumulation of dust, dirt, food particles, and other debris.
20-21.11(a)(07)
Openings. outside openings not protected against the entrance of insects by filling or closing holes and other gaps along floors / walls / ceilings / tight-fitting, self-closing doors, kept closed / closed windows / screening / properly designed and installed air curtains to control flying insects / other means.
20-21.21(b)
Attachments. light fixtures / vent covers / wall-mounted fans / similar equipment not including decorative items attached to walls and ceilings not easily cleanable / not maintained in good repair / not kept clean.
20-21.23(g)
70
Feb 19, 2024
Routine Inspection (001)
3 minor violations. 1 corrected on site.
View 3 violations
Applicability of article; compliance; penalty for violation; variances, etc. permit holder / person in charge of the food establishment / mobile food unit not in compliance in accordance with provisions of article ii concerning food storage / food preparation / food display / training of employees in basic food safety principles including allergy awareness / not ensuring that food and conditional employees are informed of their responsibility to report information regarding health and activities as they relate to diseases that are transmissible through food / not ensuring written procedures and plans are developed by the food establishment are maintained / implemented.
(corrected on site)
20-19(d)
8-304.11(k) the permit holder shall notify customers that a copy of the most recent establishment inspection report is available upon request by posting a sign or placard in a location in the food establishment that is conspicuous to customers or by another method acceptable to the regulatory authority.
20-20(c)
Materials; general. all equipment and utensils not maintained in good repair.
20-21.10(a)
86
Frequently Asked Questions
When was Flemingo Supermarket last inspected?
The most recent health inspection at Flemingo Supermarket on file is from Nov 10, 2025. The public record contains five inspections in total.
What is the most common violation at Flemingo Supermarket?
Across the inspection record, “plumbing fixture installation” has been cited four times, more than any other issue at Flemingo Supermarket.
How does Flemingo Supermarket compare to other restaurants in Houston?
Flemingo Supermarket most recently scored 55 out of 100, which is lower than the Houston average of 87.
Has Flemingo Supermarket's inspection record improved over time?
Results have been roughly steady. Inspections at Flemingo Supermarket have averaged around 12 violations per visit across the recent record.
What does a medium risk rating mean?
A medium risk rating at Flemingo Supermarket means the most recent inspection turned up a handful of issues that the health department wrote up but did not classify as critical.
How often is Flemingo Supermarket inspected?
Based on the inspection history on file, Flemingo Supermarket is inspected around three times per year on average.
Nearby Restaurants