Holiday Inn Express Hotel

8-304.11(k) the permit holder shall notify customers that a copy of the most recent establishment inspection report is available upon request by posting a sign or placard in a location in the food establishment that is conspicuous to customers or by another method acceptable to the regulatory authority.

Temperature and pressure measuring devices. indicating thermometers required for immersion into food or cooking media shall be of metal stem-type construction, numerically scaled, and accurate to ± 2°f in the intended range of use if scaled only in fahrenheit.

Materials; general. sponges. sponges used in contact with cleaned and sanitized or in-use food-contact surfaces.

Cleaning frequency. nonfood-contact surfaces of equipment not cleaned as often as is necessary to keep the equipment free of accumulation of dust, dirt, food particles, and other debris.

Manual sanitizing. food-contact surfaces of all equipment and utensils not sanitized by immersion in a chlorine solution in a manner that complies with one of the following; 25 ppm at a minimum temperature of 120of for 10 seconds when ph is <=10, 50 ppm at a minimum temperature of 100of for 7 seconds when ph is <=10, 50 ppm at a minimum temperature of 75of for 7 seconds when ph is <=8, or 100 ppm at a minimum temperature of 55of for 10 seconds when ph is <=10.

Maintenance. walls / ceilings, including doors, windows, skylights, and similar closures, not kept clean.

Materials; general. sponges. sponges used in contact with cleaned and sanitized or in-use food-contact surfaces.

Cleaning frequency. nonfood-contact surfaces of equipment not cleaned as often as is necessary to keep the equipment free of accumulation of dust, dirt, food particles, and other debris.

Maintenance. walls / ceilings, including doors, windows, skylights, and similar closures, not kept clean.

8-304.11(k) the permit holder shall notify customers that a copy of the most recent establishment inspection report is available upon request by posting a sign or placard in a location in the food establishment that is conspicuous to customers or by another method acceptable to the regulatory authority.

Materials; general. sponges. sponges used in contact with cleaned and sanitized or in-use food-contact surfaces.

Wiping cloths. moist cloths used for wiping food spills on kitchenware and food-contact surfaces of equipment not clean / not rinsed frequently in one of the sanitizing solutions permitted in section 20-21.12(e)(02) through (06) of this code / used for no other purpose. these cloths shall be stored in the sanitizing solution between uses.

Cleaning frequency. nonfood-contact surfaces of equipment not cleaned as often as is necessary to keep the equipment free of accumulation of dust, dirt, food particles, and other debris.

Single-service articles. single-service and single-use articles not stored at least six inches (15 cm) above the floor on dollies / pallets / racks / skids designed as specified under section 20-21.03(a)2b of this code / not kept in closed cartons that protect them from contamination, except for automatic fire protection sprinkler heads that may be required by law.

Hand-washing sink installation. hand-washing sink not accessible to employees at all times.

Hand-washing sink supplies. hand-washing sink or group of adjacent hand-washing sinks not provided with individual, disposable towels / a continuous towel system that supplies the user with a clean towel / a hand-drying device providing heated air or a hand-drying device that employs an air-knife system that delivers high velocity, pressurized air at ambient temperatures.

Floors. floors and floor coverings of all food preparation, food storage, utensil-washing areas, walk-in refrigerating units, dressing rooms, locker rooms, and toilet rooms shall be kept clean.

Maintenance. walls / ceilings, including doors, windows, skylights, and similar closures, not kept clean.

Cleaning equipment storage. after use, mops not placed in a position that allows them to air-dry without soiling walls / equipment / supplies.

Plumbing fixture installation. plumbing fixtures, including compartment type utensil-and-food sinks, hand-washing sinks and mop or utility sinks, not installed to preclude splashes from running down mounting surfaces behind and adjacent to the fixture. acceptable installation methods include a liquid tight seal between fixture and mounting surface, insertion into a precut counter, table or cabinet with a perimeter seal or any other effective method. all materials used shall be safe, smooth, impervious and easily cleanable. (corrected on site)