La Michoacana Meat Market #50
Last inspected: Jan 15, 2026
50
Score
La Michoacana Meat Market #50, located at 9335 Howard Dr in Houston, TX, had a high-risk inspection on January 15, 2026, with 14 minor violations. These violations included a failure to post a sign indicating the availability of inspection reports, improperly labeled manufactured food, and time/temperature controlled for safety food not held at the required 135°F. The facility's inspection history shows a pattern of mostly medium-risk outcomes across six scored inspections.
6
Inspections
0
Critical latest
0
Major latest
14
Minor latest
Inspection History
Jan 15, 2026
Reinspection (002)
14 minor violations. 2 corrected on site.
View 14 violations
8-304.11(k) the permit holder shall notify customers that a copy of the most recent establishment inspection report is available upon request by posting a sign or placard in a location in the food establishment that is conspicuous to customers or by another method acceptable to the regulatory authority.
20-20(c)
Special requirements. manufactured food. all food manufactured, processed, or packaged in commercial food processing establishments or commissaries not labeled according to all applicable laws as defined in tfer 228.78 and 228.79.
20-21.01(b)(06)
Hot storage. time/temperature controlled for safety (tcs) food in hot storage not being held at 135°f (57°c) or above.
(corrected on site)
20-21.03(c)(02)
Refrigerated storage. refrigeration facilities. each mechanically refrigerated facility storing time/temperature controlled for safety (tcs) food shall be provided with numerically scaled indicating thermometer, accurate to 3°f if scaled in fahrenheit only. . recording thermometers, accurate to 3°f if scaled in fahrenheit only, may be used in lieu of indicating thermometers. thermometers that are scaled in celsius or dually scaled in celsius and fahrenheit shall be designed to be easily readable and accurate to ±(1.05°c) in the intended range of use.
20-21.03(b)(01)
General. contamination event. food establishment without written procedures for employees to follow when responding to vomiting or diarrheal events.
20-21.07(a)(03)
Materials; general. all equipment and utensils not maintained in good repair.
20-21.10(a)
Cleaning frequency. nonfood-contact surfaces of equipment not cleaned as often as is necessary to keep the equipment free of accumulation of dust, dirt, food particles, and other debris.
20-21.11(a)(07)
Hand-washing sink supplies. when disposable towels are used, easily cleanable waste receptacles not conveniently located near the hand-washing facilities.
20-21.19(c)
Containers. in containers designed with drains, drain plugs not in place at all times, except during cleaning.
20-21.20(a)(03)
Openings. outside openings not protected against the entrance of insects by filling or closing holes and other gaps along floors / walls / ceilings / tight-fitting, self-closing doors, kept closed / closed windows / screening / properly designed and installed air curtains to control flying insects / other means.
20-21.21(b)
Floors. floors and floor coverings of all food preparation, food storage, utensil-washing areas, walk-in refrigerating units, dressing rooms, locker rooms, and toilet rooms shall be maintained in good repair.
20-21.22(a)
Maintenance. walls / ceilings, including doors, windows, skylights, and similar closures, not maintained in good repair.
20-21.23(a)
Attachments. light fixtures / vent covers / wall-mounted fans / similar equipment not including decorative items attached to walls and ceilings not easily cleanable / not maintained in good repair / not kept clean.
20-21.23(g)
Presence and use, restrictions, conditions of use. poisonous / toxic materials unnecessary for the operation / maintenance of the establishment / cleaning and sanitization of equipment and utensils / control of insects and rodents are prohibited in the food establishment; provided, this requirement does not apply to packaged poisonous / toxic materials that are for retail sale. restricted use pesticides specified in item (03)c of this subsection shall meet the requirements specified in 40 cfr 152, subpart i, classification of pesticides.
(corrected on site)
20-21.27(a)(01)
50
Jul 21, 2025
Reinspection (002)
20 minor violations. 4 corrected on site.
View 20 violations
Materials; general. multi-use equipment and utensils not designed, constructed and repaired with safe materials, including finishing materials / not corrosion-resistant and nonabsorbent / not smooth, easily cleanable and durable under conditions of normal use.
20-21.10(a)
8-304.11(k) the permit holder shall notify customers that a copy of the most recent establishment inspection report is available upon request by posting a sign or placard in a location in the food establishment that is conspicuous to customers or by another method acceptable to the regulatory authority.
(corrected on site)
20-20(c)
Refrigerated storage. refrigeration facilities. each mechanically refrigerated facility storing time/temperature controlled for safety (tcs) food shall be provided with numerically scaled indicating thermometer, accurate to 3°f if scaled in fahrenheit only. . recording thermometers, accurate to 3°f if scaled in fahrenheit only, may be used in lieu of indicating thermometers. thermometers that are scaled in celsius or dually scaled in celsius and fahrenheit shall be designed to be easily readable and accurate to ±(1.05°c) in the intended range of use.
20-21.03(b)(01)
Hand wash procedure. food employees not cleaning their hands in a handwashing lavatory or approved automatic handwashing facility. employees may not clean their hands in a sinks used for food preparation or utensil or equipment washing, or in a service sink or a curbed cleaning facility used for the disposal of mop water and similar liquid waste.
(corrected on site)
20-21.08(b)
General. food employees not using the following cleaning procedures to clean their hands and exposed portions of their arms, including surrogate prosthetic devices for hands and arms. vigorous friction on the surfaces of the lathered fingers, finger tips, areas between the fingers, hands and arms (or by vigorous rubbing the surrogate prosthetic devices for hands and arms) for at least ten-15 seconds, followed by; thorough rinsing under clean, running warm water; followed immediately by thorough drying of cleaned hands and arms (or surrogate prosthetic devices) using a method specified in section 20-21.19(c) of this code.
20-21.08(a)
Plumbing fixture installation. plumbing fixtures, including compartment type utensil-and-food sinks, hand-washing sinks and mop or utility sinks, not installed to preclude splashes from running down mounting surfaces behind and adjacent to the fixture. acceptable installation methods include a liquid tight seal between fixture and mounting surface, insertion into a precut counter, table or cabinet with a perimeter seal or any other effective method. all materials used shall be safe, smooth, impervious and easily cleanable.
20-21.10(m)
Cleaning frequency. nonfood-contact surfaces of equipment not cleaned as often as is necessary to keep the equipment free of accumulation of dust, dirt, food particles, and other debris.
20-21.11(a)(07)
Single-service articles. single-service and single-use articles not handled / displayed / dispensed in a manner that prevents contamination of surfaces that may come in contact with food or with the mouth of the user.
(corrected on site)
20-21.14(c)(02)
General. plumbing not sized / installed / maintained according to applicable laws.
20-21.17(a)
Containers. in containers designed with drains, drain plugs not in place at all times, except during cleaning.
20-21.20(a)(03)
Openings. outside openings not protected against the entrance of insects by filling or closing holes and other gaps along floors / walls / ceilings / tight-fitting, self-closing doors, kept closed / closed windows / screening / properly designed and installed air curtains to control flying insects / other means.
20-21.21(b)
Removing dead or trapped birds / insects / rodents / other pests. dead or trapped birds / insects / rodents / other pests not removed from control devices and the premises at a frequency that prevents the accumulation or attraction of pests and minimizes exposure to decomposing remains.
20-21.21(d)
Controlling pests, generally. the presence of insects, rodents, and other pests shall be controlled to eliminate their presence within the physical facility and its contents and on the contiguous land or property under the control of the permit holder by using appropriate methods of pest control, such as trapping devices or other means of pest control as specified under section 20-21.27 of this code.\r\n
20-21.21(a)(03)
Floors. floors and floor coverings of all food preparation, food storage, utensil-washing areas, walk-in refrigerating units, dressing rooms, locker rooms, and toilet rooms shall be maintained in good repair.
20-21.22(a)
Floor junctures. when allowed in this subsection, the juncture between walls and floors presenting an open seam of more than one-thirty-second of an inch.
20-21.22(f)
Attachments. light fixtures / vent covers / wall-mounted fans / similar equipment not including decorative items attached to walls and ceilings not easily cleanable / not maintained in good repair / not kept clean.
20-21.23(g)
Maintenance. walls / ceilings, including doors, windows, skylights, and similar closures, not kept clean.
20-21.23(a)
Construction. walls, including nonsupporting partitions / wall coverings / ceilings, of walk-in refrigerating units / food preparation areas / food storage areas / food display areas / equipment-washing areas / utensil-washing areas not light-colored / smooth / nonabsorbent / easily cleanable except for ceilings over areas used only for beverage preparation and/or service. concrete or pumice blocks used for interior wall construction in these locations shall be finished and sealed to provide an easily cleanable surface except in dry storage areas.
20-21.23(b)
Special ventilation. filters not cleaned at sufficient frequency to prevent accumulation.
20-21.25(b)(03)
Presence and use, restrictions, conditions of use. poisonous / toxic materials unnecessary for the operation / maintenance of the establishment / cleaning and sanitization of equipment and utensils / control of insects and rodents are prohibited in the food establishment; provided, this requirement does not apply to packaged poisonous / toxic materials that are for retail sale. restricted use pesticides specified in item (03)c of this subsection shall meet the requirements specified in 40 cfr 152, subpart i, classification of pesticides.
(corrected on site)
20-21.27(a)(01)
37
May 1, 2025
Routine Inspection (001)
11 minor violations. 1 corrected on site.
View 11 violations
Refrigerated storage. refrigeration facilities. each mechanically refrigerated facility storing time/temperature controlled for safety (tcs) food shall be provided with numerically scaled indicating thermometer, accurate to 3°f if scaled in fahrenheit only. . recording thermometers, accurate to 3°f if scaled in fahrenheit only, may be used in lieu of indicating thermometers. thermometers that are scaled in celsius or dually scaled in celsius and fahrenheit shall be designed to be easily readable and accurate to ±(1.05°c) in the intended range of use.
20-21.03(b)(01)
Cleaning frequency. nonfood-contact surfaces of equipment not cleaned as often as is necessary to keep the equipment free of accumulation of dust, dirt, food particles, and other debris.
20-21.11(a)(07)
General. plumbing not sized / installed / maintained according to applicable laws.
20-21.17(a)
Hand-washing sink supplies. hand-washing sink or group of adjacent hand-washing sinks not provided with individual, disposable towels / a continuous towel system that supplies the user with a clean towel / a hand-drying device providing heated air or a hand-drying device that employs an air-knife system that delivers high velocity, pressurized air at ambient temperatures.
20-21.19(c)
Openings. outside openings not protected against the entrance of insects by filling or closing holes and other gaps along floors / walls / ceilings / tight-fitting, self-closing doors, kept closed / closed windows / screening / properly designed and installed air curtains to control flying insects / other means.
20-21.21(b)
Controlling pests, generally. the presence of insects, rodents, and other pests shall be controlled to eliminate their presence within the physical facility and its contents and on the contiguous land or property under the control of the permit holder by routinely inspecting the premises for the evidence of pests.\r\n
20-21.21(a)(02)
Removing dead or trapped birds / insects / rodents / other pests. dead or trapped birds / insects / rodents / other pests not removed from control devices and the premises at a frequency that prevents the accumulation or attraction of pests and minimizes exposure to decomposing remains.
(corrected on site)
20-21.21(d)
Maintenance. walls / ceilings, including doors, windows, skylights, and similar closures, not kept clean.
20-21.23(a)
Attachments. light fixtures / vent covers / wall-mounted fans / similar equipment not including decorative items attached to walls and ceilings not easily cleanable / not maintained in good repair / not kept clean.
20-21.23(g)
Construction. walls, including nonsupporting partitions / wall coverings / ceilings, of walk-in refrigerating units / food preparation areas / food storage areas / food display areas / equipment-washing areas / utensil-washing areas not light-colored / smooth / nonabsorbent / easily cleanable except for ceilings over areas used only for beverage preparation and/or service. concrete or pumice blocks used for interior wall construction in these locations shall be finished and sealed to provide an easily cleanable surface except in dry storage areas.
20-21.23(b)
Food establishment failed to maintain on premises a certificate of completion of the food handler course for each food employee.
20-53(g)
58
Dec 17, 2024
Reinspection (002)
4 minor violations. 3 corrected on site.
View 4 violations
8-304.11(k) the permit holder shall notify customers that a copy of the most recent establishment inspection report is available upon request by posting a sign or placard in a location in the food establishment that is conspicuous to customers or by another method acceptable to the regulatory authority.
(corrected on site)
20-20(c)
Hot storage. time/temperature controlled for safety (tcs) food in hot storage not being held at 135°f (57°c) or above.
(corrected on site)
20-21.03(c)(02)
Dispensing utensils not stored in water at least 135°f (57°c) / water container is not cleaned as often as necessary.
(corrected on site)
20-21.05(f)(04)
Openings. outside openings not protected against the entrance of insects by filling or closing holes and other gaps along floors / walls / ceilings / tight-fitting, self-closing doors, kept closed / closed windows / screening / properly designed and installed air curtains to control flying insects / other means.
20-21.21(b)
82
Oct 9, 2024
Routine Inspection (001)
10 minor violations. 3 corrected on site.
View 10 violations
General. food not in sound condition / safe for human consumption / free from spoilage, filth, other contaminants. food prepared in or obtained from an unlicensed private home or other unlicensed food establishment is considered to be from an unapproved source and may not be used or offered for sale for human consumption in or from a food establishment.
(corrected on site)
20-21.01(a)
Hot storage. time/temperature controlled for safety (tcs) food in hot storage not being held at 135°f (57°c) or above.
(corrected on site)
20-21.03(c)(02)
Refrigerated storage. refrigeration facilities. each mechanically refrigerated facility storing time/temperature controlled for safety (tcs) food shall be provided with numerically scaled indicating thermometer, accurate to 3°f if scaled in fahrenheit only. . recording thermometers, accurate to 3°f if scaled in fahrenheit only, may be used in lieu of indicating thermometers. thermometers that are scaled in celsius or dually scaled in celsius and fahrenheit shall be designed to be easily readable and accurate to ±(1.05°c) in the intended range of use.
20-21.03(b)(01)
Dispensing utensils not stored in water at least 135°f (57°c) / water container is not cleaned as often as necessary.
20-21.05(f)(04)
General. food employees not using the following cleaning procedures to clean their hands and exposed portions of their arms, including surrogate prosthetic devices for hands and arms. vigorous friction on the surfaces of the lathered fingers, finger tips, areas between the fingers, hands and arms (or by vigorous rubbing the surrogate prosthetic devices for hands and arms) for at least ten-15 seconds, followed by; thorough rinsing under clean, running warm water; followed immediately by thorough drying of cleaned hands and arms (or surrogate prosthetic devices) using a method specified in section 20-21.19(c) of this code.
(corrected on site)
20-21.08(a)
General. plumbing not sized / installed / maintained according to applicable laws.
20-21.17(a)
Backflow. an air gap between the water supply inlet and the flood level rim of the plumbing fixture / equipment / or nonfood equipment not at least twice the diameter of the water supply inlet and may not be less than 25 mm (1 inch). a backflow or backsiphonage prevention device installed on a water supply system shall meet american society of sanitary engineering (asse) standards for construction, installation, maintenance, inspection, and testing for that specific application and type of device. a backflow prevention device shall be located so that it can be serviced and maintained. a hose shall not be attached to a faucet unless a backflow prevention device is installed.
20-21.17(c)
Openings. outside openings not protected against the entrance of insects by filling or closing holes and other gaps along floors / walls / ceilings / tight-fitting, self-closing doors, kept closed / closed windows / screening / properly designed and installed air curtains to control flying insects / other means.
20-21.21(b)
Floors. floors and floor coverings of all food preparation, food storage, utensil-washing areas, walk-in refrigerating units, dressing rooms, locker rooms, and toilet rooms shall be maintained in good repair.
20-21.22(a)
Maintenance. walls / ceilings, including doors, windows, skylights, and similar closures, not maintained in good repair.
20-21.23(a)
61
May 28, 2024
Routine Inspection (001)
7 minor violations. 3 corrected on site.
View 7 violations
Floors. floors and floor coverings of all food preparation, food storage, utensil-washing areas, walk-in refrigerating units, dressing rooms, locker rooms, and toilet rooms shall be maintained in good repair.
20-21.22(a)
General. container of food not stored a minimum of 6 inches above the floor.
(corrected on site)
20-21.03(a)(02)
Refrigerated storage. methods for rapid cooling. approved methods for rapid cooling not utilized.
(corrected on site)
20-21.03(b)(03)
Materials; general. multi-use equipment and utensils not designed, constructed and repaired with safe materials, including finishing materials / not corrosion-resistant and nonabsorbent / not smooth, easily cleanable and durable under conditions of normal use.
20-21.10(a)
Cleaning frequency. nonfood-contact surfaces of equipment not cleaned as often as is necessary to keep the equipment free of accumulation of dust, dirt, food particles, and other debris.
20-21.11(a)(07)
Removing dead or trapped birds / insects / rodents / other pests. dead or trapped birds / insects / rodents / other pests not removed from control devices and the premises at a frequency that prevents the accumulation or attraction of pests and minimizes exposure to decomposing remains.
(corrected on site)
20-21.21(d)
Openings. outside openings not protected against the entrance of insects by filling or closing holes and other gaps along floors / walls / ceilings / tight-fitting, self-closing doors, kept closed / closed windows / screening / properly designed and installed air curtains to control flying insects / other means.
20-21.21(b)
70
Nearby Restaurants