Louisiana Fried Chicken

8610 Almeda Rd, Houston, TX 77054
American
Last inspected: Oct 19, 2025
43
Score
High Risk

Louisiana Fried Chicken, located at 8610 Almeda Rd in Houston, TX, underwent a high-risk inspection on October 19, 2025, with a score of 43. This inspection identified 17 minor violations, including issues with food protection from contamination and the proper labeling of bulk food. While this recent inspection indicated a high-risk status, historical records for Louisiana Fried Chicken show mostly low-risk inspections across four scored events.

4
Inspections
0
Critical latest
0
Major latest
17
Minor latest
Inspection History
Oct 19, 2025
Routine Inspection (001)
17 minor violations. 2 corrected on site.
View 17 violations
8-304.11(k) the permit holder shall notify customers that a copy of the most recent establishment inspection report is available upon request by posting a sign or placard in a location in the food establishment that is conspicuous to customers or by another method acceptable to the regulatory authority.
20-20(c)
General. at all times, including while being stored, prepared, displayed, served, received, or transported, food not protected from potential contamination by all agents, including dust, insects, rodents, toxic materials, cross-contamination, damaged or spoiled products, distressed merchandise, recalled products, unclean equipment and utensils, unnecessary handling, coughs and sneezes, flooding, draining, and overhead leakage or overhead drippage from condensation. (corrected on site)
20-21.02(a)(01)
General. bulk food removed from original container not stored in a container identifying the food by common name.
20-21.03(a)(06)
General. raw / prepared food removed from original containers / packages being stored in unclean containers / being stored in uncovered containers.. (corrected on site)
20-21.03(a)(01)
Dispensing utensils. no suitable dispensing utensils provided for employees / consumers during pauses in food preparation / dispensing.
20-21.05(f)
Materials; general. single-service and single-use articles. single-service articles / single-use articles reused.
20-21.10(a)(05)
Materials; general. all equipment and utensils not maintained in good repair.
20-21.10(a)
Cleaning frequency. nonfood-contact surfaces of equipment not cleaned as often as is necessary to keep the equipment free of accumulation of dust, dirt, food particles, and other debris.
20-21.11(a)(07)
Hand-washing signage. sign / icon / poster that notifies food employees to wash their hands not provided at all hand-washing sinks used by food employees / not clearly visible to food employees.
20-21.19(g)
Hand-washing sink installation. hand-washing sink not accessible to employees at all times.
20-21.19(a)
Containers. in containers designed with drains, drain plugs not in place at all times, except during cleaning.
20-21.20(a)(03)
Openings. outside openings not protected against the entrance of insects by filling or closing holes and other gaps along floors / walls / ceilings / tight-fitting, self-closing doors, kept closed / closed windows / screening / properly designed and installed air curtains to control flying insects / other means.
20-21.21(b)
Floor junctures. in all new or extensively remodeled establishments utilizing concrete / terrazzo / ceramic tile / similar flooring materials, and where water flush cleaning methods are used, the junctures between walls and floors not coved / not sealed. in all other cases, the juncture between walls and floors shall not present an open seam of more than one-thirty-second of an inch.
20-21.22(f)
Maintenance. walls / ceilings, including doors, windows, skylights, and similar closures, not maintained in good repair.
20-21.23(a)
General. at least 50 foot-candles (540 lux) of light not provided at a surface where a food employee may be working with food / with utensils / with equipment such as knives / slicers / grinders / saws where employee safety is a factor.
20-21.24(a)
Cleaning equipment storage. after use, mops not placed in a position that allows them to air-dry without soiling walls / equipment / supplies.
20-21.28(e)
Food establishment failed to maintain on premises a certificate of completion of the food handler course for each food employee.
20-53(g)
43
Apr 9, 2025
Routine Inspection (001)
2 minor violations. 2 corrected on site.
View 2 violations
Cross contamination. except as specified in subitem c of this item, food not protected from cross contamination by separating raw animal foods during storage, preparation, holding and display from: raw ready to eat foods including other raw animal food such as fish for sushi or molluscan shellfish or other raw ready to eat food such as vegetables; cooked ready to eat foods. frozen, commercially processed and packaged raw animal food may be stored or displayed with or above frozen, commercially processed and packaged, ready to eat food. (corrected on site)
20-21.02(b)(01)
Thawing time/temperature controlled for safety (tcs) food. reduced oxygen packaged fish that bears a label indicating that it is to be kept frozen until time of use not removed from the reduced oxygen environment prior to thawing under refrigeration as specified in item (01) of this subsection, or prior to, or immediately upon completion of thawing using procedures specified in item (02) of this subsection. (corrected on site)
20-21.04(j)
90
Dec 16, 2024
Routine Inspection (001)
6 minor violations. 3 corrected on site.
View 6 violations
Applicability of article; compliance; penalty for violation; variances, etc. permit holder / person in charge of the food establishment / mobile food unit not in compliance in accordance with provisions of article ii concerning food storage / food preparation / food display / training of employees in basic food safety principles including allergy awareness / not ensuring that food and conditional employees are informed of their responsibility to report information regarding health and activities as they relate to diseases that are transmissible through food / not ensuring written procedures and plans are developed by the food establishment are maintained / implemented. (corrected on site)
20-19(d)
Refrigerated storage. date marking of ready to eat foods. time/temperature controlled for safety (tcs) and ready to eat food stored at 41°f (5°c) for more than seven days. (corrected on site)
20-21.03(b)(10)b
Temperature measuring device, food. food temperature measuring devices accurate to ±02°f in the intended range of use not provided / not used to assure attainment and maintenance of proper internal cooking, holding, or refrigeration temperatures of all time/temperature controlled for safety (tcs) food if the thermometers are scaled only in fahrenheit. if the thermometers are scaled in celsius or dually scaled, they shall be accurate to ±01°c in the intended range of use. a temperature measuring device with a suitable small-diameter probe that is designed to measure the temperature of thin masses not provided / not readily accessible to accurately measure the temperature in thin foods, such as meat patties and fish fillets.
20-21.04(i)
General. contamination event. food establishment without written procedures for employees to follow when responding to vomiting or diarrheal events. (corrected on site)
20-21.07(a)(03)
Cleaning frequency. nonfood-contact surfaces of equipment not cleaned as often as is necessary to keep the equipment free of accumulation of dust, dirt, food particles, and other debris.
20-21.11(a)(07)
Containers. containers stored outside the establishment / dumpsters / compactors / compactor systems / receptacles / waste handling units for refuse / recyclables / and returnables not provided with tight-fitting lids / doors / covers, not kept covered when not in actual use. in containers designed with drains, drain plugs shall be in place at all times, except during cleaning.
20-21.20(a)(03)
74
May 2, 2024
Routine
1 minor violation.
View 1 violation
Backflow. an air gap between the water supply inlet and the flood level rim of the plumbing fixture / equipment / or nonfood equipment not at least twice the diameter of the water supply inlet and may not be less than 25 mm (1 inch). a backflow or backsiphonage prevention device installed on a water supply system shall meet american society of sanitary engineering (asse) standards for construction, installation, maintenance, inspection, and testing for that specific application and type of device. a backflow prevention device shall be located so that it can be serviced and maintained. a hose shall not be attached to a faucet unless a backflow prevention device is installed.
20-21.17(c)
95