Mcdonald's #18444

Plumbing fixture installation. plumbing fixtures, including compartment type utensil-and-food sinks, hand-washing sinks and mop or utility sinks, not installed to preclude splashes from running down mounting surfaces behind and adjacent to the fixture. acceptable installation methods include a liquid tight seal between fixture and mounting surface, insertion into a precut counter, table or cabinet with a perimeter seal or any other effective method. all materials used shall be safe, smooth, impervious and easily cleanable. (corrected on site)

Cleaning frequency. nonfood-contact surfaces of equipment not cleaned as often as is necessary to keep the equipment free of accumulation of dust, dirt, food particles, and other debris. (corrected on site)

Manual sanitizing. food-contact surfaces of all equipment and utensils not sanitized by immersion in a chlorine solution in a manner that complies with one of the following; 25 ppm at a minimum temperature of 120of for 10 seconds when ph is <=10, 50 ppm at a minimum temperature of 100of for 7 seconds when ph is <=10, 50 ppm at a minimum temperature of 75of for 7 seconds when ph is <=8, or 100 ppm at a minimum temperature of 55of for 10 seconds when ph is <=10. (corrected on site)

Floors. floors and floor coverings of all food preparation, food storage, utensil-washing areas, walk-in refrigerating units, dressing rooms, locker rooms, and toilet rooms shall be kept clean. (corrected on site)