Mezcal Houston Fine Mexican Cuisine

Cooking time/temperature controlled for safety (tcs) foods. consumer advisory (disclosure). when animal food such as beef / eggs / fish / lamb / milk / pork / poultry / shellfish are served or sold raw / undercooked / without otherwise being processed to eliminate pathogens either in ready to eat form or as an ingredient in another ready to eat food (except as specified in items (03) and (08) of this subsection) not including a description of the animal-derived foods, such as \"oysters on the half shell (raw oysters)\", \"raw-egg caesar salad\", and \"hamburgers (can be cooked to order) / identification of the animal-derived foods in a menu or other listing by asterisking them to a footnote that states that the items are served raw or undercooked or contain (or may contain) raw or undercooked ingredients.

Backflow. an air gap between the water supply inlet and the flood level rim of the plumbing fixture / equipment / or nonfood equipment not at least twice the diameter of the water supply inlet and may not be less than 25 mm (1 inch). a backflow or backsiphonage prevention device installed on a water supply system shall meet american society of sanitary engineering (asse) standards for construction, installation, maintenance, inspection, and testing for that specific application and type of device. a backflow prevention device shall be located so that it can be serviced and maintained. a hose shall not be attached to a faucet unless a backflow prevention device is installed.

Refrigerated storage. refrigeration facilities. each mechanically refrigerated facility storing time/temperature controlled for safety (tcs) food shall be provided with numerically scaled indicating thermometer, accurate to 3°f if scaled in fahrenheit only. . recording thermometers, accurate to 3°f if scaled in fahrenheit only, may be used in lieu of indicating thermometers. thermometers that are scaled in celsius or dually scaled in celsius and fahrenheit shall be designed to be easily readable and accurate to ±(1.05°c) in the intended range of use.

Materials; general. all equipment and utensils not maintained in good repair.

Temperature and pressure measuring devices. ambient air and water temperature measuring devices that are scaled only in fahrenheit not accurate to ± 3°f in the intended range of use.

Table-mounted equipment. equipment that is fixed because it is not easily moveable not installed so that it is: spaced to allow access for cleaning along the sides, behind, and above the equipment / spaced from adjoining equipment, walls, and ceilings a distance of not more than one millimeter or one-thirty-second inch / sealed to adjoining equipment, walls or ceilings, if the equipment is exposed to spillage or seepage, is not spaced from adjoining equipment, walls or ceilings to allow access for cleaning, and requires no utility connections. this subsection does not apply to shelving units, refrigeration units and freezer units used for consumer display in retail store shopping areas, if the floor under the units is kept clean.

Plumbing fixture installation. plumbing fixtures, including compartment type utensil-and-food sinks, hand-washing sinks and mop or utility sinks, not installed to preclude splashes from running down mounting surfaces behind and adjacent to the fixture. acceptable installation methods include a liquid tight seal between fixture and mounting surface, insertion into a precut counter, table or cabinet with a perimeter seal or any other effective method. all materials used shall be safe, smooth, impervious and easily cleanable.

Cleaning frequency. nonfood-contact surfaces of equipment not cleaned as often as is necessary to keep the equipment free of accumulation of dust, dirt, food particles, and other debris.

Using chemicals for sanitization. when using chemicals for sanitization, a test kit or other device that accurately measures the concentration of the solution in parts per million or milligrams per liter not provided and used.

Water under pressure. food establishment operating without hot and/or cold water under pressure at all fixtures and equipment that use water.

Hand-washing sink installation. hand-washing sink used for purpose other than hand-washing as specified in section 20-21.08(b) of this code. (corrected on site)

Hand-washing sink maintenance. hand-washing sink / soap dispenser / hand-drying device/ related fixtures not kept clean / not in good repair.

Hand-washing sink supplies. when disposable towels are used, easily cleanable waste receptacles not conveniently located near the hand-washing facilities.

Storage. outside storage areas / enclosures not constructed of durable and cleanable material / not large enough to store the garbage / recyclables / returnables / refuse containers that accumulate / not kept clean.

Maintaining refuse areas and enclosures. storage area / enclosure for refuse / recyclables / returnables not maintained free of items that are unnecessary to the operation or maintenance of the establishment, such as equipment that is nonfunctional or no longer used, as specified in section 20-21.28(a)(03) / not maintained clean.

Floors. floors and floor coverings of all food preparation, food storage, utensil-washing areas, walk-in refrigerating units, dressing rooms, locker rooms, and toilet rooms shall be kept clean.

Construction. walls, including nonsupporting partitions / wall coverings / ceilings, of walk-in refrigerating units / food preparation areas / food storage areas / food display areas / equipment-washing areas / utensil-washing areas not light-colored / smooth / nonabsorbent / easily cleanable except for ceilings over areas used only for beverage preparation and/or service. concrete or pumice blocks used for interior wall construction in these locations shall be finished and sealed to provide an easily cleanable surface except in dry storage areas.

Maintenance. walls / ceilings, including doors, windows, skylights, and similar closures, not maintained in good repair.

General. at least 20 foot-candles (220 lux) of light not provided at a distance of 30 inches (75 mm) above the floor in areas used for hand-washing / utensil-washing / equipment and utensil storage / in toilet rooms.

General. food establishment and all parts of the property used in connection with operations of the establishment not kept free of litter and items that are unnecessary to the operation or maintenance of the establishment, such as equipment that is nonfunctional or no longer in use.

Changes made in proposed arrangement of facilities not appearing on both original sets of plans and specifications.

Sanitation poster not conspicuously posted in area accessible to all employees / not conforming to all requirements.

\"no smoking\" signs or the international \"no smoking\" symbol not clearly and conspicuously posted in a public place where smoking is prohibited

Sinks. compartment of sink required by this article less than 15 inches in length, 15 inches in width, and 12 inches in depth.

Toilet room. toilet room not provided with tight-fitting / self-closing / solid doors, which shall be closed except during cleaning or maintenance except that this requirement does not apply to a toilet room that is located outside a food establishment and does not open directly into the food establishment such as a toilet room that is provided by the management of a shopping mall or stadium-type facilities.

Utility line/duct installation. exposed utility service lines and pipes not installed in a way that does not obstruct or prevent cleaning of the walls and ceilings. utility service lines and pipes shall not be unnecessarily exposed on walls or ceilings in those areas listed in subsection (b) of this section. service lines behind counters used only for beverage preparation may be exposed on the inside counter walls if necessary for service and if kept to a minimum. if exposed in rooms or areas allowed in subsection (c) of this section, air conditioning / ventilation / heating ducts shall be of smooth rigid metal and designed with a circular cross-section.

Food establishment construction / remodeling / alterations begun before submitting properly prepared plans / specifications for approval.