Skyline Food Store

Refrigerated storage. refrigeration facilities. each mechanically refrigerated facility storing time/temperature controlled for safety (tcs) food shall be provided with numerically scaled indicating thermometer, accurate to 3°f if scaled in fahrenheit only. . recording thermometers, accurate to 3°f if scaled in fahrenheit only, may be used in lieu of indicating thermometers. thermometers that are scaled in celsius or dually scaled in celsius and fahrenheit shall be designed to be easily readable and accurate to ±(1.05°c) in the intended range of use.

Temperature measuring device, food. no temperature measuring device provided to assure attainment / maintenance of proper internal / holding refrigerated temperature of time/temperature controlled for safety (tcs) food.

Materials; general. multi-use equipment and utensils not designed, constructed and repaired with safe materials, including finishing materials / not corrosion-resistant and nonabsorbent / not smooth, easily cleanable and durable under conditions of normal use.

Table-mounted equipment. equipment that is fixed because it is not easily moveable not installed so that it is: spaced to allow access for cleaning along the sides, behind, and above the equipment / spaced from adjoining equipment, walls, and ceilings a distance of not more than one millimeter or one-thirty-second inch / sealed to adjoining equipment, walls or ceilings, if the equipment is exposed to spillage or seepage, is not spaced from adjoining equipment, walls or ceilings to allow access for cleaning, and requires no utility connections. this subsection does not apply to shelving units, refrigeration units and freezer units used for consumer display in retail store shopping areas, if the floor under the units is kept clean.

Cleaning frequency. nonfood-contact surfaces of equipment not cleaned as often as is necessary to keep the equipment free of accumulation of dust, dirt, food particles, and other debris.

Using chemicals for sanitization. when using chemicals for sanitization, a test kit or other device that accurately measures the concentration of the solution in parts per million or milligrams per liter not provided and used.

Manual sanitizing. failure to demonstrate with approval by the department that food-contact surfaces of all equipment and utensils are sanitized by immersion in other solutions of the chemicals specified in items 20-21.12(e)(02) through 20-21.12(e)(04).

Ice manufacture. ice not made from water meeting the requirements of this section / not made in an approved ice-making machine or plant / not located, installed, operated, cleaned, and maintained so as to prevent contamination of the ice.

Backflow. an air gap between the water supply inlet and the flood level rim of the plumbing fixture / equipment / or nonfood equipment not at least twice the diameter of the water supply inlet and may not be less than 25 mm (1 inch). a backflow or backsiphonage prevention device installed on a water supply system shall meet american society of sanitary engineering (asse) standards for construction, installation, maintenance, inspection, and testing for that specific application and type of device. a backflow prevention device shall be located so that it can be serviced and maintained. a hose shall not be attached to a faucet unless a backflow prevention device is installed.

Hand-washing sink supplies. hand-washing sink or group of adjacent hand-washing sinks not provided with individual, disposable towels / a continuous towel system that supplies the user with a clean towel / a hand-drying device providing heated air or a hand-drying device that employs an air-knife system that delivers high velocity, pressurized air at ambient temperatures.

Containers. containers stored outside the establishment / dumpsters / compactors / compactor systems / receptacles / waste handling units for refuse / recyclables / and returnables not provided with tight-fitting lids / doors / covers, not kept covered when not in actual use. in containers designed with drains, drain plugs shall be in place at all times, except during cleaning.

Storage. outside storage areas / enclosures not constructed of durable and cleanable material / not large enough to store the garbage / recyclables / returnables / refuse containers that accumulate / not kept clean.

Openings. outside openings not protected against the entrance of insects by filling or closing holes and other gaps along floors / walls / ceilings / tight-fitting, self-closing doors, kept closed / closed windows / screening / properly designed and installed air curtains to control flying insects / other means.

Maintenance. walls / ceilings, including doors, windows, skylights, and similar closures, not maintained in good repair.

Wall protection. walls within water closet compartments / walls within two feet of the front and sides of urinals / hand-washing sinks / utensil-washing sinks / food sinks / mop or utility sinks / walls subject to damage from moisture not provided to a height of at least four feet above the finished floor with a smooth / light-colored impervious surface of a type not adversely affected by moisture or grease except that light-colored wall protection is not required in toilet rooms.

Changes made in proposed arrangement of facilities not appearing on both original sets of plans and specifications.

Signs clearly stating that smoking is prohibited within not conspicuously posted at every entrance to a public place.

\"no smoking\" signs or the international \"no smoking\" symbol not clearly and conspicuously posted in a public place where smoking is prohibited