Sunmart #290
Last inspected: May 19, 2025
52
Score
Sunmart #290 appears in inspection records three times, starting in 2024. The most recent visit was on May 19, 2025. The high risk label is a heads-up that the most recent visit didn't go well.
The latest visit found 13 violations, down from 16 violations the time before.
Compared to other Houston restaurants (averaging 87), there's room to close the gap. Diners may want to weigh the inspection history when deciding to visit.
3
Inspections
0
Critical latest
0
Major latest
13
Minor latest
Inspection History
May 19, 2025
Reinspection (002)
13 minor violations.
View 13 violations
General. using shipping containers / milk / produce crates as storage racks / support shelves.
20-21.03(a)(02)c
Bulk food display, service. the sale of unpackaged food that is displayed and sold in bulk from a self-service container is authorized, provided that the self-service container has a tight-fitting lid that is securely attached to the container and kept closed except during service or refill; the container, lid and any other utensil are constructed of nontoxic materials that provide for easy cleaning and proper repair; a utensil equipped with a handle is provided and used for dispensing of food; and a conspicuous sign instructing the customer on the proper dispensing procedure is posted in the immediate display area.
20-21.05(i)(01)
Plumbing fixture installation. plumbing fixtures, including compartment type utensil-and-food sinks, hand-washing sinks and mop or utility sinks, not installed to preclude splashes from running down mounting surfaces behind and adjacent to the fixture. acceptable installation methods include a liquid tight seal between fixture and mounting surface, insertion into a precut counter, table or cabinet with a perimeter seal or any other effective method. all materials used shall be safe, smooth, impervious and easily cleanable.
20-21.10(m)
Cleaning frequency. dry cleaning. surfaces of utensils and equipment contacting food that is not time/temperature controlled for safety (tcs) food not cleaned in equipment such as ice bins, beverage dispensing nozzles, enclosed components of equipment such as ice makers, cooking oil storage tanks and distribution lines, beverage and syrup dispensing lines or tubes, coffee bean grinders, and water vending equipment at a frequency specified by the manufacturer; or absent manufacturer specifications, at a frequency necessary to preclude accumulation of soil or mold. this subsection does not apply when dry cleaning methods are used as specified in subitems a and b of this item.
20-21.11(a)(08)c[04]
Using chemicals for sanitization. when using chemicals for sanitization, a test kit or other device that accurately measures the concentration of the solution in parts per million or milligrams per liter not provided and used.
20-21.12(g)
Toilet fixtures. toilet room not provided with at least one covered waste receptacle.
20-21.18(d)
Containers. containers stored outside the establishment / dumpsters / compactors / compactor systems / receptacles / waste handling units for refuse / recyclables / and returnables not provided with tight-fitting lids / doors / covers, not kept covered when not in actual use. in containers designed with drains, drain plugs shall be in place at all times, except during cleaning.
20-21.20(a)(03)
Storage. garbage and refuse containers / dumpsters / compactor systems / waste handling units for returnables and recyclables located outside not stored on or above a smooth durable surface of nonabsorbent material, such as sealed concrete or machine-laid asphalt, that is kept clean / maintained in good repair / sloped to drain.
20-21.20(b)(03)
Openings. outside openings not protected against the entrance of insects by filling or closing holes and other gaps along floors / walls / ceilings / tight-fitting, self-closing doors, kept closed / closed windows / screening / properly designed and installed air curtains to control flying insects / other means.
20-21.21(b)
Floor junctures. in all new or extensively remodeled establishments utilizing concrete / terrazzo / ceramic tile / similar flooring materials, and where water flush cleaning methods are used, the junctures between walls and floors not coved / not sealed. in all other cases, the juncture between walls and floors shall not present an open seam of more than one-thirty-second of an inch.
20-21.22(f)
Maintenance. walls / ceilings, including doors, windows, skylights, and similar closures, not maintained in good repair.
20-21.23(a)
Attachments. light fixtures / vent covers / wall-mounted fans / similar equipment not including decorative items attached to walls and ceilings not easily cleanable / not maintained in good repair / not kept clean.
20-21.23(g)
Sanitation poster not conspicuously posted in area accessible to all employees / not conforming to all requirements.
20-26(c)
52
May 18, 2025
Reinspection (002)
18 minor violations. 1 corrected on site.
View 18 violations
Applicability of article; compliance; penalty for violation; variances, etc. operating a food service / processing establishment not conforming to requirements of article ii.
(corrected on site)
20-19(b)
General. using shipping containers / milk / produce crates as storage racks / support shelves.
20-21.03(a)(02)c
Refrigerated storage. refrigeration facilities. each mechanically refrigerated facility storing time/temperature controlled for safety (tcs) food shall be provided with numerically scaled indicating thermometer, accurate to 3°f if scaled in fahrenheit only. . recording thermometers, accurate to 3°f if scaled in fahrenheit only, may be used in lieu of indicating thermometers. thermometers that are scaled in celsius or dually scaled in celsius and fahrenheit shall be designed to be easily readable and accurate to ±(1.05°c) in the intended range of use.
20-21.03(b)(01)
Bulk food display, service. the sale of unpackaged food that is displayed and sold in bulk from a self-service container is authorized, provided that the self-service container has a tight-fitting lid that is securely attached to the container and kept closed except during service or refill; the container, lid and any other utensil are constructed of nontoxic materials that provide for easy cleaning and proper repair; a utensil equipped with a handle is provided and used for dispensing of food; and a conspicuous sign instructing the customer on the proper dispensing procedure is posted in the immediate display area.
20-21.05(i)(01)
Plumbing fixture installation. plumbing fixtures, including compartment type utensil-and-food sinks, hand-washing sinks and mop or utility sinks, not installed to preclude splashes from running down mounting surfaces behind and adjacent to the fixture. acceptable installation methods include a liquid tight seal between fixture and mounting surface, insertion into a precut counter, table or cabinet with a perimeter seal or any other effective method. all materials used shall be safe, smooth, impervious and easily cleanable.
20-21.10(m)
Cleaning frequency. dry cleaning. surfaces of utensils and equipment contacting food that is not time/temperature controlled for safety (tcs) food not cleaned in equipment such as ice bins, beverage dispensing nozzles, enclosed components of equipment such as ice makers, cooking oil storage tanks and distribution lines, beverage and syrup dispensing lines or tubes, coffee bean grinders, and water vending equipment at a frequency specified by the manufacturer; or absent manufacturer specifications, at a frequency necessary to preclude accumulation of soil or mold. this subsection does not apply when dry cleaning methods are used as specified in subitems a and b of this item.
20-21.11(a)(08)c[04]
Using chemicals for sanitization. when using chemicals for sanitization, a test kit or other device that accurately measures the concentration of the solution in parts per million or milligrams per liter not provided and used.
20-21.12(g)
Single-service articles. single-service and single-use articles not stored at least six inches (15 cm) above the floor on dollies / pallets / racks / skids designed as specified under section 20-21.03(a)2b of this code / not kept in closed cartons that protect them from contamination, except for automatic fire protection sprinkler heads that may be required by law.
20-21.14(c)(01)
Toilet fixtures. easily cleanable receptacles not provided for waste materials.
20-21.18(d)
Containers. containers stored outside the establishment / dumpsters / compactors / compactor systems / receptacles / waste handling units for refuse / recyclables / and returnables not provided with tight-fitting lids / doors / covers, not kept covered when not in actual use. in containers designed with drains, drain plugs shall be in place at all times, except during cleaning.
20-21.20(a)(03)
Storage. garbage and refuse containers / dumpsters / compactor systems / waste handling units for returnables and recyclables located outside not stored on or above a smooth durable surface of nonabsorbent material, such as sealed concrete or machine-laid asphalt, that is kept clean / maintained in good repair / sloped to drain.
20-21.20(b)(03)
Controlling pests, generally. effective measures intended to eliminate the presence of rodents, flies, cockroaches, and other insects on the premises not utilized.
20-21.21(a)
Openings. outside openings not protected against the entrance of insects by filling or closing holes and other gaps along floors / walls / ceilings / tight-fitting, self-closing doors, kept closed / closed windows / screening / properly designed and installed air curtains to control flying insects / other means.
20-21.21(b)
Floor junctures. in all new or extensively remodeled establishments utilizing concrete / terrazzo / ceramic tile / similar flooring materials, and where water flush cleaning methods are used, the junctures between walls and floors not coved / not sealed. in all other cases, the juncture between walls and floors shall not present an open seam of more than one-thirty-second of an inch.
20-21.22(f)
Maintenance. walls / ceilings, including doors, windows, skylights, and similar closures, not maintained in good repair.
20-21.23(a)
Attachments. light fixtures / vent covers / wall-mounted fans / similar equipment not including decorative items attached to walls and ceilings not easily cleanable / not maintained in good repair / not kept clean.
20-21.23(g)
Cleaning equipment storage. after use, mops not placed in a position that allows them to air-dry without soiling walls / equipment / supplies.
20-21.28(e)
Sanitation poster not conspicuously posted in area accessible to all employees / not conforming to all requirements.
20-26(c)
41
Nov 4, 2024
Routine Inspection (001)
13 minor violations.
View 13 violations
Applicability of article; compliance; penalty for violation; variances, etc. permit holder / person in charge of the food establishment / mobile food unit not in compliance in accordance with provisions of article ii concerning food storage / food preparation / food display / training of employees in basic food safety principles including allergy awareness / not ensuring that food and conditional employees are informed of their responsibility to report information regarding health and activities as they relate to diseases that are transmissible through food / not ensuring written procedures and plans are developed by the food establishment are maintained / implemented.
20-19(d)
General. food not obtained from sources that comply with all laws relating to food and food labeling as defined in tfer 228.78 and 228.79.
20-21.01(a)
Cleaning frequency. nonfood-contact surfaces of equipment not cleaned as often as is necessary to keep the equipment free of accumulation of dust, dirt, food particles, and other debris.
20-21.11(a)(07)
Cleaning frequency. dry cleaning. surfaces of utensils and equipment contacting food that is not time/temperature controlled for safety (tcs) food not cleaned in equipment such as ice bins, beverage dispensing nozzles, enclosed components of equipment such as ice makers, cooking oil storage tanks and distribution lines, beverage and syrup dispensing lines or tubes, coffee bean grinders, and water vending equipment at a frequency specified by the manufacturer; or absent manufacturer specifications, at a frequency necessary to preclude accumulation of soil or mold. this subsection does not apply when dry cleaning methods are used as specified in subitems a and b of this item.
20-21.11(a)(08)c[04]
Using chemicals for sanitization. when using chemicals for sanitization, a test kit or other device that accurately measures the concentration of the solution in parts per million or milligrams per liter not provided and used.
20-21.12(g)
Toilet fixtures. toilet room not provided with at least one covered waste receptacle.
20-21.18(d)
Hand-washing sink supplies. supply of hand-cleansing liquid / powder / bar soap not available at each hand-washing sink or group of two adjacent hand-washing sinks.
20-21.19(c)
Hand-washing signage. sign / icon / poster that notifies food employees to wash their hands not provided at all hand-washing sinks used by food employees / not clearly visible to food employees.
20-21.19(g)
Containers. containers stored outside the establishment / dumpsters / compactors / compactor systems / receptacles / waste handling units for refuse / recyclables / and returnables not provided with tight-fitting lids / doors / covers, not kept covered when not in actual use. in containers designed with drains, drain plugs shall be in place at all times, except during cleaning.
20-21.20(a)(03)
Openings. outside openings not protected against the entrance of insects by filling or closing holes and other gaps along floors / walls / ceilings / tight-fitting, self-closing doors, kept closed / closed windows / screening / properly designed and installed air curtains to control flying insects / other means.
20-21.21(b)
Maintenance. walls / ceilings, including doors, windows, skylights, and similar closures, not maintained in good repair.
20-21.23(a)
Cleaning equipment storage. after use, mops not placed in a position that allows them to air-dry without soiling walls / equipment / supplies.
20-21.28(e)
Sanitation poster not conspicuously posted in area accessible to all employees / not conforming to all requirements.
20-26(c)
52
Frequently Asked Questions
When was Sunmart #290 last inspected?
The most recent health inspection at Sunmart #290 on file is from May 19, 2025. The public record contains three inspections in total.
How does Sunmart #290 compare to other restaurants in Houston?
Sunmart #290 most recently scored 52 out of 100, which is lower than the Houston average of 87.
Has Sunmart #290's inspection record improved over time?
Yes. Recent inspections at Sunmart #290 have turned up fewer violations than earlier ones, with the latest finding around 13 violations compared to about 16 previously.
What does a high risk rating mean?
A high risk rating at Sunmart #290 means the most recent inspection flagged either critical violations or a substantial number of smaller ones. Diners may want to read the violation details before deciding to visit.
Nearby Restaurants