Supermercado Gigante #1
Last inspected: Oct 20, 2025
55
Score
Supermercado Gigante #1 has been inspected five times since 2024. The latest inspection on file is from Oct 20, 2025. A medium risk rating points to a few notable findings at the last inspection, though nothing severe.
Things have been moving the wrong way, with the rolling count rising from around 10 violations to closer to 12 violations per visit.
“Refrigerated storage” accounts for the largest share of issues, appearing three times across the record.
The city-wide average sits at 88, which Supermercado Gigante #1's 55 doesn't quite reach. Taken together, the history looks like that of a busy facility working through the usual inspection cycle.
5
Inspections
0
Critical latest
0
Major latest
12
Minor latest
Inspection History
Oct 20, 2025
Reinspection (002)
12 minor violations. 1 corrected on site.
View 12 violations
8-304.11(k) the permit holder shall notify customers that a copy of the most recent establishment inspection report is available upon request by posting a sign or placard in a location in the food establishment that is conspicuous to customers or by another method acceptable to the regulatory authority.
20-20(c)
Refrigerated storage. refrigeration facilities. each mechanically refrigerated facility storing time/temperature controlled for safety (tcs) food shall be provided with numerically scaled indicating thermometer, accurate to 3°f if scaled in fahrenheit only. . recording thermometers, accurate to 3°f if scaled in fahrenheit only, may be used in lieu of indicating thermometers. thermometers that are scaled in celsius or dually scaled in celsius and fahrenheit shall be designed to be easily readable and accurate to ±(1.05°c) in the intended range of use.
20-21.03(b)(01)
Materials; general. all equipment and utensils not maintained in good repair.
20-21.10(a)
Plumbing fixture installation. plumbing fixtures, including compartment type utensil-and-food sinks, hand-washing sinks and mop or utility sinks, not installed to preclude splashes from running down mounting surfaces behind and adjacent to the fixture. acceptable installation methods include a liquid tight seal between fixture and mounting surface, insertion into a precut counter, table or cabinet with a perimeter seal or any other effective method. all materials used shall be safe, smooth, impervious and easily cleanable.
20-21.10(m)
Cleaning frequency. nonfood-contact surfaces of equipment not cleaned as often as is necessary to keep the equipment free of accumulation of dust, dirt, food particles, and other debris.
20-21.11(a)(07)
Toilet room. toilet facility / vestibule, not kept clean / not in good repair / not free of objectionable odors.
20-21.18(c)
Openings. outside openings not protected against the entrance of insects by filling or closing holes and other gaps along floors / walls / ceilings / tight-fitting, self-closing doors, kept closed / closed windows / screening / properly designed and installed air curtains to control flying insects / other means.
20-21.21(b)
Floors. floors and floor coverings of all food preparation, food storage, utensil-washing areas, walk-in refrigerating units, dressing rooms, locker rooms, and toilet rooms shall be maintained in good repair.
20-21.22(a)
Attachments. light fixtures / vent covers / wall-mounted fans / similar equipment not including decorative items attached to walls and ceilings not easily cleanable / not maintained in good repair / not kept clean.
20-21.23(g)
Maintenance. walls / ceilings, including doors, windows, skylights, and similar closures, not maintained in good repair.
20-21.23(a)
Storage, separation of materials. poisonous or toxic materials not stored so they cannot contaminate food / equipment / utensils / linens / single-service and single-use articles. this may be accomplished by separating the poisonous / toxic material by spacing / partitioning and locating the poisonous / toxic material in an area that is not above food / equipment / utensils / linens / single-service or single-use articles. this item does not apply to equipment or utensil cleaners or sanitizers that are stored in utensil-washing areas for availability and convenience if the materials are stored to prevent contamination of food / equipment / utensils / linens / or single-service or single-use articles.
(corrected on site)
20-21.27(c)
General. food establishment and all parts of the property used in connection with operations of the establishment not kept free of litter and items that are unnecessary to the operation or maintenance of the establishment, such as equipment that is nonfunctional or no longer in use.
20-21.28(a)(01)
55
Jul 17, 2025
Routine Inspection (001)
17 minor violations. 2 corrected on site.
View 17 violations
8-304.11(k) the permit holder shall notify customers that a copy of the most recent establishment inspection report is available upon request by posting a sign or placard in a location in the food establishment that is conspicuous to customers or by another method acceptable to the regulatory authority.
20-20(c)
General. at all times, including while being stored, prepared, displayed, served, received, or transported, food not protected from potential contamination by all agents, including dust, insects, rodents, toxic materials, cross-contamination, damaged or spoiled products, distressed merchandise, recalled products, unclean equipment and utensils, unnecessary handling, coughs and sneezes, flooding, draining, and overhead leakage or overhead drippage from condensation.
20-21.02(a)(01)
Refrigerated storage. rapid cooling temperatures. time/temperature controlled for safety (tcs) food not cooled from 135°f (21° c) to 41°f (5°c) or below within 6 hours.
(corrected on site)
20-21.03(b)(02)a
General. using shipping containers / milk / produce crates as storage racks / support shelves.
20-21.03(a)(02)c
Dispensing utensils not stored with the handle extended out from the food.
20-21.05(f)(01)
Plumbing fixture installation. plumbing fixtures, including compartment type utensil-and-food sinks, hand-washing sinks and mop or utility sinks, not installed to preclude splashes from running down mounting surfaces behind and adjacent to the fixture. acceptable installation methods include a liquid tight seal between fixture and mounting surface, insertion into a precut counter, table or cabinet with a perimeter seal or any other effective method. all materials used shall be safe, smooth, impervious and easily cleanable.
20-21.10(m)
Materials; general. multi-use equipment and utensils not designed, constructed and repaired with safe materials, including finishing materials / not corrosion-resistant and nonabsorbent / not smooth, easily cleanable and durable under conditions of normal use.
20-21.10(a)
Cleaning frequency. nonfood-contact surfaces of equipment not cleaned as often as is necessary to keep the equipment free of accumulation of dust, dirt, food particles, and other debris.
20-21.11(a)(07)
Single-service articles. single-service and single-use articles not stored at least six inches (15 cm) above the floor on dollies / pallets / racks / skids designed as specified under section 20-21.03(a)2b of this code / not kept in closed cartons that protect them from contamination, except for automatic fire protection sprinkler heads that may be required by law.
20-21.14(c)(01)
Hand-washing sink supplies. when disposable towels are used, easily cleanable waste receptacles not conveniently located near the hand-washing facilities.
20-21.19(c)
Hand-washing sink installation. hand-washing sink used for purpose other than hand-washing as specified in section 20-21.08(b) of this code.
(corrected on site)
20-21.19(a)
Containers. containers stored outside the establishment / dumpsters / compactors / compactor systems / receptacles / waste handling units for refuse / recyclables / and returnables not provided with tight-fitting lids / doors / covers, not kept covered when not in actual use. in containers designed with drains, drain plugs shall be in place at all times, except during cleaning.
20-21.20(a)(03)
Openings. outside openings not protected against the entrance of insects by filling or closing holes and other gaps along floors / walls / ceilings / tight-fitting, self-closing doors, kept closed / closed windows / screening / properly designed and installed air curtains to control flying insects / other means.
20-21.21(b)
Floor junctures. when allowed in this subsection, the juncture between walls and floors presenting an open seam of more than one-thirty-second of an inch.
20-21.22(f)
Maintenance. walls / ceilings, including doors, windows, skylights, and similar closures, not maintained in good repair.
20-21.23(a)
Attachments. light fixtures / vent covers / wall-mounted fans / similar equipment not including decorative items attached to walls and ceilings not easily cleanable / not maintained in good repair / not kept clean.
20-21.23(g)
Labeling of materials. working containers used for storing poisonous / toxic materials such as cleaners and sanitizers taken from bulk supplies not clearly / individually identified with the common name of the material.
20-21.27(b)
43
Jun 21, 2024
Reinspection (002)
3 minor violations.
View 3 violations
Cleaning frequency. nonfood-contact surfaces of equipment not cleaned as often as is necessary to keep the equipment free of accumulation of dust, dirt, food particles, and other debris.
20-21.11(a)(07)
Floors. floors and floor coverings of all food preparation, food storage, utensil-washing areas, walk-in refrigerating units, dressing rooms, locker rooms, and toilet rooms shall be kept clean.
20-21.22(a)
Maintenance. walls / ceilings, including doors, windows, skylights, and similar closures, not kept clean.
20-21.23(a)
86
Jun 20, 2024
Reinspection (002)
26 minor violations. 8 corrected on site.
View 26 violations
Applicability of article; compliance; penalty for violation; variances, etc. operating a food service / processing establishment not conforming to requirements of article ii.
20-19(b)
General. food not obtained from sources that comply with all laws relating to food and food labeling as defined in tfer 228.78 and 228.79.
(corrected on site)
20-21.01(a)
Refrigerated storage. date marking of ready to eat foods. time/temperature controlled for safety (tcs) / ready to eat food opened / prepared / packaged and held refrigerated for more than 24 hours not clearly marked to indicate “time food is opened / prepared” and “disposition date”.
(corrected on site)
20-21.03(b)(10)b
General. using shipping containers / milk / produce crates as storage racks / support shelves.
20-21.03(a)(02)c
General. container of food not stored a minimum of 6 inches above the floor.
20-21.03(a)(02)
Hot storage. time/temperature controlled for safety (tcs) food in hot storage not being held at 135°f (57°c) or above.
(corrected on site)
20-21.03(c)(02)
Refrigerated storage. refrigeration facilities. each mechanically refrigerated facility storing time/temperature controlled for safety (tcs) food shall be provided with numerically scaled indicating thermometer, accurate to 3°f if scaled in fahrenheit only. . recording thermometers, accurate to 3°f if scaled in fahrenheit only, may be used in lieu of indicating thermometers. thermometers that are scaled in celsius or dually scaled in celsius and fahrenheit shall be designed to be easily readable and accurate to ±(1.05°c) in the intended range of use.
20-21.03(b)(01)
Dispensing utensils not stored with the handle extended out from the food.
20-21.05(f)(01)
Materials; general. single-service and single-use articles. single-service articles / single-use articles reused.
20-21.10(a)(05)
Materials; general. all equipment and utensils not maintained in good repair.
20-21.10(a)
Cleaning frequency. equipment, food-contact surfaces, and utensils not clean to sight and touch.
20-21.11(a)(13)
Cleaning frequency. nonfood-contact surfaces of equipment not cleaned as often as is necessary to keep the equipment free of accumulation of dust, dirt, food particles, and other debris.
20-21.11(a)(07)
Wiping cloths. moist cloths used for cleaning nonfood-contact surfaces of equipment such as counters, dining table tops and shelves not clean / not rinsed frequently in one of the sanitizing solutions permitted in section 20-21.12(e)(02) through (06) of this code / used for no other purpose. these cloths shall be stored in the sanitizing solution between uses.
(corrected on site)
20-21.11(c)(03)
Cleaning frequency. dry cleaning. surfaces of utensils and equipment contacting food that is not time/temperature controlled for safety (tcs) food not cleaned in equipment such as ice bins, beverage dispensing nozzles, enclosed components of equipment such as ice makers, cooking oil storage tanks and distribution lines, beverage and syrup dispensing lines or tubes, coffee bean grinders, and water vending equipment at a frequency specified by the manufacturer; or absent manufacturer specifications, at a frequency necessary to preclude accumulation of soil or mold. this subsection does not apply when dry cleaning methods are used as specified in subitems a and b of this item.
(corrected on site)
20-21.11(a)(08)c[04]
Single-service articles. single-service and single-use articles not stored at least six inches (15 cm) above the floor on dollies / pallets / racks / skids designed as specified under section 20-21.03(a)2b of this code / not kept in closed cartons that protect them from contamination, except for automatic fire protection sprinkler heads that may be required by law.
20-21.14(c)(01)
Storage. utensils and equipment not air-dried before being stored / not stored in a self-draining position. utensils and equipment may not be cloth-dried except that utensils that have been air-dried may be polished with cloths that are maintained clean and dry.
20-21.14(b)(02)
Backflow. an air gap between the water supply inlet and the flood level rim of the plumbing fixture / equipment / or nonfood equipment not at least twice the diameter of the water supply inlet and may not be less than 25 mm (1 inch). a backflow or backsiphonage prevention device installed on a water supply system shall meet american society of sanitary engineering (asse) standards for construction, installation, maintenance, inspection, and testing for that specific application and type of device. a backflow prevention device shall be located so that it can be serviced and maintained. a hose shall not be attached to a faucet unless a backflow prevention device is installed.
20-21.17(c)
Toilet fixtures. toilet room not provided with at least one covered waste receptacle.
20-21.18(d)
Hand-washing sink supplies. hand-washing sink or group of adjacent hand-washing sinks not provided with individual, disposable towels / a continuous towel system that supplies the user with a clean towel / a hand-drying device providing heated air or a hand-drying device that employs an air-knife system that delivers high velocity, pressurized air at ambient temperatures.
(corrected on site)
20-21.19(c)
Controlling pests, generally. effective measures intended to eliminate the presence of rodents, flies, cockroaches, and other insects on the premises not utilized.
20-21.21(a)
Floors. floors and floor coverings of all food preparation, food storage, utensil-washing areas, walk-in refrigerating units, dressing rooms, locker rooms, and toilet rooms shall be kept clean.
20-21.22(a)
Maintenance. walls / ceilings, including doors, windows, skylights, and similar closures, not maintained in good repair.
20-21.23(a)
Attachments. light fixtures / vent covers / wall-mounted fans / similar equipment not including decorative items attached to walls and ceilings not easily cleanable / not maintained in good repair / not kept clean.
(corrected on site)
20-21.23(g)
Presence and use, restrictions, conditions of use. using pesticides that have not been properly registered and approved by appropriate governmental authorities for the purpose of maintaining food service establishments in a sanitary condition.
(corrected on site)
20-21.27(a)(02)
General. food establishment and all parts of the property used in connection with operations of the establishment not kept free of litter and items that are unnecessary to the operation or maintenance of the establishment, such as equipment that is nonfunctional or no longer in use.
20-21.28(a)(01)
\"no smoking\" signs or the international \"no smoking\" symbol not clearly and conspicuously posted in a public place where smoking is prohibited
21-244(a)
27
Feb 20, 2024
Routine Inspection (001)
11 minor violations. 1 corrected on site.
View 11 violations
Special requirements. manufactured food. all food manufactured, processed, or packaged in commercial food processing establishments or commissaries not labeled according to all applicable laws as defined in tfer 228.78 and 228.79.
20-21.01(b)(06)
Refrigerated storage. rapid cooling temperatures. time/temperature controlled for safety (tcs) food not cooled from 135°f (21° c) to 41°f (5°c) or below within 6 hours.
(corrected on site)
20-21.03(b)(02)a
Refrigerated storage. refrigeration facilities. each mechanically refrigerated facility storing time/temperature controlled for safety (tcs) food shall be provided with numerically scaled indicating thermometer, accurate to 3°f if scaled in fahrenheit only. . recording thermometers, accurate to 3°f if scaled in fahrenheit only, may be used in lieu of indicating thermometers. thermometers that are scaled in celsius or dually scaled in celsius and fahrenheit shall be designed to be easily readable and accurate to ±(1.05°c) in the intended range of use.
20-21.03(b)(01)
Dispensing utensils not stored with the handle extended out from the food.
20-21.05(f)(01)
Materials; general. multi-use equipment and utensils not designed, constructed and repaired with safe materials, including finishing materials / not corrosion-resistant and nonabsorbent / not smooth, easily cleanable and durable under conditions of normal use.
20-21.10(a)
Backflow. an air gap between the water supply inlet and the flood level rim of the plumbing fixture / equipment / or nonfood equipment not at least twice the diameter of the water supply inlet and may not be less than 25 mm (1 inch). a backflow or backsiphonage prevention device installed on a water supply system shall meet american society of sanitary engineering (asse) standards for construction, installation, maintenance, inspection, and testing for that specific application and type of device. a backflow prevention device shall be located so that it can be serviced and maintained. a hose shall not be attached to a faucet unless a backflow prevention device is installed.
20-21.17(c)
Openings. outside openings not protected against the entrance of insects by filling or closing holes and other gaps along floors / walls / ceilings / tight-fitting, self-closing doors, kept closed / closed windows / screening / properly designed and installed air curtains to control flying insects / other means.
20-21.21(b)
Floors. floors and floor coverings of all food preparation, food storage, utensil-washing areas, walk-in refrigerating units, dressing rooms, locker rooms, and toilet rooms shall be maintained in good repair.
20-21.22(a)
Maintenance. walls / ceilings, including doors, windows, skylights, and similar closures, not maintained in good repair.
20-21.23(a)
Food employee failed to successfully complete a food handler training course within 60 days of employment.
20-53(f)
\"no smoking\" signs or the international \"no smoking\" symbol not clearly and conspicuously posted in a public place where smoking is prohibited
21-244(a)
58
Frequently Asked Questions
When was Supermercado Gigante #1 last inspected?
The most recent health inspection at Supermercado Gigante #1 on file is from Oct 20, 2025. The public record contains five inspections in total.
What is the most common violation at Supermercado Gigante #1?
Across the inspection record, “refrigerated storage” has been cited three times, more than any other issue at Supermercado Gigante #1.
How does Supermercado Gigante #1 compare to other restaurants in Houston?
Supermercado Gigante #1 most recently scored 55 out of 100, which is lower than the Houston average of 88.
Has Supermercado Gigante #1's inspection record improved over time?
No. Recent inspections at Supermercado Gigante #1 have averaged around 12 violations per visit, up from roughly 10 earlier in the record.
What does a medium risk rating mean?
A medium risk rating at Supermercado Gigante #1 means the most recent inspection turned up a handful of issues that the health department wrote up but did not classify as critical.
How often is Supermercado Gigante #1 inspected?
Based on the inspection history on file, Supermercado Gigante #1 is inspected around three times per year on average.
Nearby Restaurants