Taqueria Guadalajara
Last inspected: Jan 8, 2026
100
Score
Taqueria Guadalajara, located at 703 South 75Th St in Houston, TX, had a low-risk inspection on January 8, 2026, with a score of 100 and no violations recorded. Across its seven recorded inspections, the facility has historically maintained mostly medium-risk scores. This most recent inspection indicates a favorable outcome for Taqueria Guadalajara.
7
Inspections
0
Critical latest
0
Major latest
0
Minor latest
Inspection History
Jan 8, 2026
Routine
No violations found.
100
Jan 5, 2026
Reinspection (002)
12 minor violations.
View 12 violations
8-304.11(k) the permit holder shall notify customers that a copy of the most recent establishment inspection report is available upon request by posting a sign or placard in a location in the food establishment that is conspicuous to customers or by another method acceptable to the regulatory authority.
20-20(c)
General. raw / prepared food removed from original containers / packages being stored in unclean containers / being stored in uncovered containers..
20-21.03(a)(01)
Materials; general. all equipment and utensils not maintained in good repair.
20-21.10(a)
Cleaning frequency. nonfood-contact surfaces of equipment not cleaned as often as is necessary to keep the equipment free of accumulation of dust, dirt, food particles, and other debris.
20-21.11(a)(07)
Hand-washing sink maintenance. hand-washing sink / soap dispenser / hand-drying device/ related fixtures not kept clean / not in good repair.
20-21.19(d)
Controlling pests, generally. the presence of insects, rodents, and other pests shall be controlled to eliminate their presence within the physical facility and its contents and on the contiguous land or property under the control of the permit holder by routinely inspecting the premises for the evidence of pests.\r\n
20-21.21(a)(02)
Floors. floors and floor coverings of all food preparation, food storage, utensil-washing areas, walk-in refrigerating units, dressing rooms, locker rooms, and toilet rooms shall be maintained in good repair.
20-21.22(a)
Maintenance. walls / ceilings, including doors, windows, skylights, and similar closures, not maintained in good repair.
20-21.23(a)
Attachments. light fixtures / vent covers / wall-mounted fans / similar equipment not including decorative items attached to walls and ceilings not easily cleanable / not maintained in good repair / not kept clean.
20-21.23(g)
Special ventilation. filters not cleaned at sufficient frequency to prevent accumulation.
20-21.25(b)(03)
Food establishment failed to maintain on premises a certificate of completion of the food handler course for each food employee.
20-53(g)
\"no smoking\" signs or the international \"no smoking\" symbol not clearly and conspicuously posted in a public place where smoking is prohibited
21-244(a)
55
Jul 22, 2025
Reinspection (002)
15 minor violations. 2 corrected on site.
View 15 violations
8-304.11(k) the permit holder shall notify customers that a copy of the most recent establishment inspection report is available upon request by posting a sign or placard in a location in the food establishment that is conspicuous to customers or by another method acceptable to the regulatory authority.
20-20(c)
Refrigerated storage. date marking of ready to eat foods. time/temperature controlled for safety (tcs) / ready to eat food opened / prepared / packaged and held refrigerated for more than 24 hours not clearly marked to indicate “time food is opened / prepared” and “disposition date”.
20-21.03(b)(10)b
General. primal cuts / quarters / sides of raw meat / slab bacon hung placed uncovered on un-sanitized racks.
20-21.03(a)(01)
Ice dispensing. between uses, ice transfer receptacles shall be stored in a way that protects them from contamination.
(corrected on site)
20-21.05(e)
Plumbing fixture installation. plumbing fixtures, including compartment type utensil-and-food sinks, hand-washing sinks and mop or utility sinks, not installed to preclude splashes from running down mounting surfaces behind and adjacent to the fixture. acceptable installation methods include a liquid tight seal between fixture and mounting surface, insertion into a precut counter, table or cabinet with a perimeter seal or any other effective method. all materials used shall be safe, smooth, impervious and easily cleanable.
20-21.10(m)
Materials; general. all equipment and utensils not maintained in good repair.
20-21.10(a)
Cleaning frequency. nonfood-contact surfaces of equipment not cleaned as often as is necessary to keep the equipment free of accumulation of dust, dirt, food particles, and other debris.
20-21.11(a)(07)
Storage. facilities for the storage of knives, forks, and spoons shall be designed and used to present the handle to the employee or consumer.
(corrected on site)
20-21.14(b)(03)
Hand-washing sink maintenance. hand-washing sink / soap dispenser / hand-drying device/ related fixtures not kept clean / not in good repair.
20-21.19(d)
Floors. floors and floor coverings of all food preparation, food storage, utensil-washing areas, walk-in refrigerating units, dressing rooms, locker rooms, and toilet rooms shall be maintained in good repair.
20-21.22(a)
Attachments. light fixtures / vent covers / wall-mounted fans / similar equipment not including decorative items attached to walls and ceilings not easily cleanable / not maintained in good repair / not kept clean.
20-21.23(g)
Maintenance. walls / ceilings, including doors, windows, skylights, and similar closures, not kept clean.
20-21.23(a)
Sanitation poster not conspicuously posted in area accessible to all employees / not conforming to all requirements.
20-26(c)
Food establishment failed to maintain on premises a certificate of completion of the food handler course for each food employee.
20-53(g)
\"no smoking\" signs or the international \"no smoking\" symbol not clearly and conspicuously posted in a public place where smoking is prohibited
21-244(a)
47
Apr 24, 2025
Routine Inspection (001)
15 minor violations.
View 15 violations
Materials; general. all equipment and utensils not maintained in good repair.
20-21.10(a)
Refrigerated storage. refrigeration facilities. each mechanically refrigerated facility storing time/temperature controlled for safety (tcs) food shall be provided with numerically scaled indicating thermometer, accurate to 3°f if scaled in fahrenheit only. . recording thermometers, accurate to 3°f if scaled in fahrenheit only, may be used in lieu of indicating thermometers. thermometers that are scaled in celsius or dually scaled in celsius and fahrenheit shall be designed to be easily readable and accurate to ±(1.05°c) in the intended range of use.
20-21.03(b)(01)
8-304.11(k) the permit holder shall notify customers that a copy of the most recent establishment inspection report is available upon request by posting a sign or placard in a location in the food establishment that is conspicuous to customers or by another method acceptable to the regulatory authority.
20-20(c)
Refrigerated storage. date marking of ready to eat foods. time/temperature controlled for safety (tcs) / ready to eat food opened / prepared / packaged and held refrigerated for more than 24 hours not clearly marked to indicate “time food is opened / prepared” and “disposition date”.
20-21.03(b)(10)b
Cleaning frequency. nonfood-contact surfaces of equipment not cleaned as often as is necessary to keep the equipment free of accumulation of dust, dirt, food particles, and other debris.
20-21.11(a)(07)
Backflow. an air gap between the water supply inlet and the flood level rim of the plumbing fixture / equipment / or nonfood equipment not at least twice the diameter of the water supply inlet and may not be less than 25 mm (1 inch). a backflow or backsiphonage prevention device installed on a water supply system shall meet american society of sanitary engineering (asse) standards for construction, installation, maintenance, inspection, and testing for that specific application and type of device. a backflow prevention device shall be located so that it can be serviced and maintained. a hose shall not be attached to a faucet unless a backflow prevention device is installed.
20-21.17(c)
Toilet room. toilet facility / vestibule, not kept clean / not in good repair / not free of objectionable odors.
20-21.18(c)
Toilet fixtures. toilet fixture not kept clean / not in good repair.
20-21.18(d)
Hand-washing sink maintenance. hand-washing sink / soap dispenser / hand-drying device/ related fixtures not kept clean / not in good repair.
20-21.19(d)
Storage. garbage and refuse containers / dumpsters / compactor systems / waste handling units for returnables and recyclables located outside not stored on or above a smooth durable surface of nonabsorbent material, such as sealed concrete or machine-laid asphalt, that is kept clean / maintained in good repair / sloped to drain.
20-21.20(b)(03)
Openings. outside openings not protected against the entrance of insects by filling or closing holes and other gaps along floors / walls / ceilings / tight-fitting, self-closing doors, kept closed / closed windows / screening / properly designed and installed air curtains to control flying insects / other means.
20-21.21(b)
Floors. floors and floor coverings of all food preparation, food storage, utensil-washing areas, walk-in refrigerating units, dressing rooms, locker rooms, and toilet rooms shall be maintained in good repair.
20-21.22(a)
Attachments. light fixtures / vent covers / wall-mounted fans / similar equipment not including decorative items attached to walls and ceilings not easily cleanable / not maintained in good repair / not kept clean.
20-21.23(g)
General. food establishment and all parts of the property used in connection with operations of the establishment not kept free of litter and items that are unnecessary to the operation or maintenance of the establishment, such as equipment that is nonfunctional or no longer in use.
20-21.28(a)(01)
\"no smoking\" signs or the international \"no smoking\" symbol not clearly and conspicuously posted in a public place where smoking is prohibited
21-244(a)
47
Oct 22, 2024
Routine Inspection (001)
5 minor violations.
View 5 violations
8-304.11(k) the permit holder shall notify customers that a copy of the most recent establishment inspection report is available upon request by posting a sign or placard in a location in the food establishment that is conspicuous to customers or by another method acceptable to the regulatory authority.
20-20(c)
Refrigerated storage. refrigeration facilities. each mechanically refrigerated facility storing time/temperature controlled for safety (tcs) food shall be provided with numerically scaled indicating thermometer, accurate to 3°f if scaled in fahrenheit only. . recording thermometers, accurate to 3°f if scaled in fahrenheit only, may be used in lieu of indicating thermometers. thermometers that are scaled in celsius or dually scaled in celsius and fahrenheit shall be designed to be easily readable and accurate to ±(1.05°c) in the intended range of use.
20-21.03(b)(01)
Storage. garbage and refuse containers / dumpsters / compactor systems / waste handling units for returnables and recyclables located outside not stored on or above a smooth durable surface of nonabsorbent material, such as sealed concrete or machine-laid asphalt, that is kept clean / maintained in good repair / sloped to drain.
20-21.20(b)(03)
Floors. floors and floor coverings of all food preparation, food storage, utensil-washing areas, walk-in refrigerating units, dressing rooms, locker rooms, and toilet rooms shall be maintained in good repair.
20-21.22(a)
\"no smoking\" signs or the international \"no smoking\" symbol not clearly and conspicuously posted in a public place where smoking is prohibited
21-244(a)
78
May 14, 2024
Routine Inspection (001)
8 minor violations.
View 8 violations
8-304.11(k) the permit holder shall notify customers that a copy of the most recent establishment inspection report is available upon request by posting a sign or placard in a location in the food establishment that is conspicuous to customers or by another method acceptable to the regulatory authority.
20-20(c)
Materials; general. all equipment and utensils not maintained in good repair.
20-21.10(a)
Backflow. an air gap between the water supply inlet and the flood level rim of the plumbing fixture / equipment / or nonfood equipment not at least twice the diameter of the water supply inlet and may not be less than 25 mm (1 inch). a backflow or backsiphonage prevention device installed on a water supply system shall meet american society of sanitary engineering (asse) standards for construction, installation, maintenance, inspection, and testing for that specific application and type of device. a backflow prevention device shall be located so that it can be serviced and maintained. a hose shall not be attached to a faucet unless a backflow prevention device is installed.
20-21.17(c)
Storage. garbage and refuse containers / dumpsters / compactor systems / waste handling units for returnables and recyclables located outside not stored on or above a smooth durable surface of nonabsorbent material, such as sealed concrete or machine-laid asphalt, that is kept clean / maintained in good repair / sloped to drain.
20-21.20(b)(03)
Openings. outside openings not protected against the entrance of insects by filling or closing holes and other gaps along floors / walls / ceilings / tight-fitting, self-closing doors, kept closed / closed windows / screening / properly designed and installed air curtains to control flying insects / other means.
20-21.21(b)
Floors. floors and floor coverings of all food preparation, food storage, utensil-washing areas, walk-in refrigerating units, dressing rooms, locker rooms, and toilet rooms shall be maintained in good repair.
20-21.22(a)
General. at least 50 foot-candles (540 lux) of light not provided at a surface where a food employee may be working with food / with utensils / with equipment such as knives / slicers / grinders / saws where employee safety is a factor.
20-21.24(a)
Food employee failed to successfully complete a food handler training course within 60 days of employment.
20-53(f)
67
Jan 22, 2024
Routine Inspection (001)
7 minor violations.
View 7 violations
8-304.11(k) the permit holder shall notify customers that a copy of the most recent establishment inspection report is available upon request by posting a sign or placard in a location in the food establishment that is conspicuous to customers or by another method acceptable to the regulatory authority.
20-20(c)
Temperature measuring device, food. no temperature measuring device provided to assure attainment / maintenance of proper internal / holding refrigerated temperature of time/temperature controlled for safety (tcs) food.
20-21.04(i)
Backflow. an air gap between the water supply inlet and the flood level rim of the plumbing fixture / equipment / or nonfood equipment not at least twice the diameter of the water supply inlet and may not be less than 25 mm (1 inch). a backflow or backsiphonage prevention device installed on a water supply system shall meet american society of sanitary engineering (asse) standards for construction, installation, maintenance, inspection, and testing for that specific application and type of device. a backflow prevention device shall be located so that it can be serviced and maintained. a hose shall not be attached to a faucet unless a backflow prevention device is installed.
20-21.17(c)
Storage. garbage and refuse containers / dumpsters / compactor systems / waste handling units for returnables and recyclables located outside not stored on or above a smooth durable surface of nonabsorbent material, such as sealed concrete or machine-laid asphalt, that is kept clean / maintained in good repair / sloped to drain.
20-21.20(b)(03)
Floors. floors and floor coverings of all food preparation, food storage, utensil-washing areas, walk-in refrigerating units, dressing rooms, locker rooms, and toilet rooms shall be maintained in good repair.
20-21.22(a)
General. at least 50 foot-candles (540 lux) of light not provided at a surface where a food employee may be working with food / with utensils / with equipment such as knives / slicers / grinders / saws where employee safety is a factor.
20-21.24(a)
Special ventilation. filters not cleaned at sufficient frequency to prevent accumulation.
20-21.25(b)(03)
70
Nearby Restaurants