El Papaturro #2

Time/temperature controlled for safety (tcs) food. except when time is used as a public health control as specified in section 20-21.02(a)(02) of this code, time/temperature controlled for safety (tcs) food shall be kept at an internal temperature of 41°f (05°c) or below or at a temperature of 135°f (57°c) or above during display and service, except that roasts cooked to a temperature and for a time specified in table 20-21.04-3 of this code or reheated as specified in table 20-21.04-01 of this code may be held for service at a temperature of 130°f (54°c) or above (corrected on site)

Use of materials, container prohibitions, poisonous or toxic material containers. bactericide / cleaning compound / other compound intended for use on food-contact surfaces used in a way that leaves a toxic residue / used in a way that constitutes a hazard to employees or customers. (corrected on site)

Cross contamination. except when combined as ingredients, raw animal foods such as fish, beef, lamb, pork, and poultry not separated from each other during storage, preparation, holding, and display by: using separate equipment for each type of food; preparing each type of food at different times or in separate areas; and arranging each type of food in equipment so that cross contamination of one type with another is prevented. (corrected on site)

Plumbing fixture installation. plumbing fixtures, including compartment type utensil-and-food sinks, hand-washing sinks and mop or utility sinks, not installed to preclude splashes from running down mounting surfaces behind and adjacent to the fixture. acceptable installation methods include a liquid tight seal between fixture and mounting surface, insertion into a precut counter, table or cabinet with a perimeter seal or any other effective method. all materials used shall be safe, smooth, impervious and easily cleanable.

Cleaning frequency. nonfood-contact surfaces of equipment not cleaned as often as is necessary to keep the equipment free of accumulation of dust, dirt, food particles, and other debris.

Toilet fixtures. toilet room not provided with at least one covered waste receptacle.

Attachments. light fixtures / vent covers / wall-mounted fans / similar equipment not including decorative items attached to walls and ceilings not easily cleanable / not maintained in good repair / not kept clean.

8-304.11(k) the permit holder shall notify customers that a copy of the most recent establishment inspection report is available upon request by posting a sign or placard in a location in the food establishment that is conspicuous to customers or by another method acceptable to the regulatory authority.

Refrigerated storage. date marking of ready to eat foods. time/temperature controlled for safety (tcs) / ready to eat food opened / prepared / packaged and held refrigerated for more than 24 hours not clearly marked to indicate “time food is opened / prepared” and “disposition date”. (corrected on site)

Materials; general. all equipment and utensils not maintained in good repair.

Hand-washing signage. sign / icon / poster that notifies food employees to wash their hands not provided at all hand-washing sinks used by food employees / not clearly visible to food employees. (corrected on site)

Labeling of materials. working containers used for storing poisonous / toxic materials such as cleaners and sanitizers taken from bulk supplies not clearly / individually identified with the common name of the material. (corrected on site)

Food employee failed to successfully complete a food handler training course within 60 days of employment.

General. raw / prepared food removed from original containers / packages being stored in unclean containers / being stored in uncovered containers..

Plumbing fixture installation. plumbing fixtures, including compartment type utensil-and-food sinks, hand-washing sinks and mop or utility sinks, not installed to preclude splashes from running down mounting surfaces behind and adjacent to the fixture. acceptable installation methods include a liquid tight seal between fixture and mounting surface, insertion into a precut counter, table or cabinet with a perimeter seal or any other effective method. all materials used shall be safe, smooth, impervious and easily cleanable.

Attachments. light fixtures / vent covers / wall-mounted fans / similar equipment not including decorative items attached to walls and ceilings not easily cleanable / not maintained in good repair / not kept clean.

Maintenance. walls / ceilings, including doors, windows, skylights, and similar closures, not kept clean.